A seamless pipe is a long hollow tube that is produced via an extrusion process as hot steel billets are passed through it. The pipes of the stainless steel are designed in different classes to meet specific requirements. The 304 Stainless Steel Pipe is one of the most sought-after stainless steel grades. These pipes have a chemical composition of 18/8 chromium and nickel with other constituting alloys. A 316 Stainless Steel Pipe is the next most available stainless steel after the 304 grade. These pipes have a good chemical content of chromium, nickel, and molybdenum, giving them enhanced resistance to corrosive media. The Stainless Steel 316L Tube is a low-carbon alternative to the 316 grade. These tubes can be easily welded and resistant to sensitization caused by pitting. A 310 Stainless Steel Tube is an austenitic low carbon grade that works well in high-temperature applications seen in furnace parts and heat treatment equipment. The 317l Stainless Steel Tubing is a high-strength corrosion resistance tube that can be readily welded following standard procedures. This tubing has good toughness and mechanical properties. Our company is a Seamless Pipe supplier in India who have a vast stock of pipes of different sizes and shapes to meet different project requirements.
The 321 Stainless Steel Seamless Tubing is stabilized by titanium and has excellent forming properties. These tubes are suitable in temperatures up to 1500 degrees F. A 347 Stainless Steel Pipe is an alternative stabilized grade to the 304 type pipe. The pipe works well in strong oxidizing conditions and has excellent tolerance to intergranular corrosion. The Duplex Pipe is designed with a ferritic and austenitic microstructure. Their unique properties allow them to work well in refineries and oil industries. A Super Duplex Pipe has a better chemical composition than the duplex pipe, giving it better tolerances. The pipe is, however, more expensive than a duplex pipe.
Product Name | Dimension | Executive Standard | Steel Code / Steel Grade |
---|---|---|---|
Seamless Austenitic Stainless Steel Pipes | OD: 6.0~914.0mm WT: 0.5~88mm | ASTM A312/A312M, ASME SA312/SA312M | TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H |
Seamless Austenitic Stainless Steel Tubing for General Service | OD: 6.0~50.8mm WT: 0.8~10.0mm | ASTM A269, ASME SA269 | TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H |
Seamless Austenitic Alloy-Steel Boiler, Super Heater and Heat-Exchanger Tubes | OD: 6.0~50.8mm WT: 0.8~10.0mm | ASTM A213/A213M, ASME SA213/SA213M | TP304, TP304L, TP304H, TP310, TP310S, TP316, TP316L, TP316Ti, TP317, TP317L, TP321, TP321H, TP347, TP347H |
Seamless Duplex Stainless Steel Tubing for General Service | OD: 19.0~60.5mm WT: 1.2~5.0mm | ASTM A789 / A789M | S31803, S32205, S32750 |
Seamless Duplex Stainless Steel Pipes | OD: 3/4"~10" WT: SCH5S~SCH80S | ASTM A790 / A790M | S31803, S32205, S32750 |
Seamless Stainless Steel Mechanical Tubing | OD: 6.0~50.8mm WT: 1.8~10.0mm | ASTM A511 | MT304, MT304L, MT304H, MT310, MT310S, MT316, MT316L, MT317, MT317L, MT321, MT321H, MT347 |
Seamless Stainless Steel Tubes for Pressure Purposes | OD: 6.0~914.0mm WT: 0.5~88mm | EN 10216, DIN 17456, 17458 | 1.4301, 1.4307, 1.4541, 1.4401, 1.4404, 1.4571, 1.4878, 1.4432, 1.4462 |
API SPEC 5L | |||
---|---|---|---|
Product Name | Executive Standard | Dimension (mm) | Steel Code / Steel Grade |
Line Pipes | API 5L | Ø10.3~1200 x WT1.0~120 | A, B, X42, X46, X52, X60, X70, X80, PSL1 / PSL2 |
DIN | |||
---|---|---|---|
Product Name | Dimension (mm) | Executive Standard | Steel Code / Steel Grade |
Seamless Steel Tubes for Elevated Temperature | Ø10~762 x WT1.0~120 | DIN 17175 | St35.8, St45.8, 10CrMo910, 15Mo3, 13CrMo44, STPL340, STB410, STB510, WB36 |
Seamless Steel Tubes | Ø13.5~762 x WT1.8~120 | DIN 1629 / DIN 2391 | St37.0, St44.0, St52.0, St52.3 |
Seamless Steel Tubes | Ø13.5~165.1 x WT1.8~4.85 | DIN 2440 | St33.2 |
Seamless Steel Pipes for Structural Purpose | Ø16~426 x WT1.0~36 | DIN 2393 | RSt34-2, RSt37-2, RSt44-2, St52 |
API SPEC 5CT | |||
---|---|---|---|
Product Name | Dimension (mm) | Executive Standard | Steel Code / Steel Grade |
Casting | Ø114~219 x WT5.2~22.2 | API 5CT | J55, K55, N80, L80, P110 |
Tubing | Ø48.3~114.3 x WT3.2~16 | API 5CT | J55, K55, N80, L80, P110 |
BS | |||
---|---|---|---|
Product Name | Dimension (mm) | Executive Standard | Steel Code / Steel Grade |
Seamless Steel Tubes for Machine Structure | Ø10~762 x WT1.0~120 | BS 970 | Carbon Steel |
Seamless Steel Tubes for Boiler and Heat Exchangers | Ø10~762 x WT1.0~120 | BS 3059 | 360, 410, 440, 460, 490 |
ASTM / ASME | |||
---|---|---|---|
Product Name | Dimension (mm) | Executive Standard | Steel Code / Steel Grade |
Black and Hot-Dipped Zinc-Coated Seamless Steel Pipes | Ø10.3~1200 x WT1.0~150 | ASTM A53 | Gr.A, Gr.B, Gr.C |
Seamless Carbon Steel Pipes for High Temperature Service | Ø10.3~1200 x WT1.0~150 | ASTM A106 | Gr.B, Gr.C |
Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes | Ø10.3~426 x WT1.0~36 | ASTM A179 | Low Carbon Steel |
Seamless Carbon Steel Boiler Tubes for High Pressure | Ø10.3~426 x WT1.0~36 | ASTM A192 | Low Carbon Steel |
Seamless Cold-Drawn Intermediate Alloy Steel Heat-Exchanger and Condenser Tubes | Ø10.3~426 x 1.0~36 | ASTM A199 | T5, T22 |
Seamless Medium-Carbon Steel Boiler and Superheater Tubes | Ø10.3~426 x WT1.0~36 | ASTM A210 | A1, C |
Seamless Ferritic and Austenitic Alloy Steel Boiler, Superheater and Heat-Exchanger Tubes | Ø10.3~426 x WT1.0~36 | ASTM A213 | T5, T9, T11, T12, T22, T91 |
Seamless Carbon and Alloy Steel for Mechanical Tubing | Ø1/4"~42" x WT SCH20~XXS | ASTM A333 | Gr.1, Gr.3, Gr.6 |
Seamless and Welded Carbon Steel Pipes and Alloy Steel Pipes for Low Temperature Use | Ø1/4"~4" x WT SCH20~SCH80 | ASTM A334 | Gr.1, Gr.6 |
Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes | Ø10.3~426 x WT1.0~36 | ASTM A556 | A2, B2 |
Description | Price Per Kg In Singapore | Price Per Kg In UAE | Price Per Kg In USD | Price Per Kg In Malaysia |
---|---|---|---|---|
219.0 MM OD X 5.7MM THK X 6000MM LENGTH GRADE TP304 STAINLESS STEEL SEAMILESS PIPE | SGD 2.84 | UAE Dirham 7.43 | US $2.05 | MYR 9.01 |
33.4MM OD X 4.55MM THK X 5.2-5.8M LENGTH ASTM A312 GRADE TP316L STAINLESS STEEL SEAMLESS PIPES | SGD 3.13 | UAE Dirham 8.18 | US $2.26 | MYR 9.92 |
50 X 50 X 1.50 MM ERW STEEL PIPES / TUBES GALVANISED OTHER THAN ASTM STANDARD | SGD 1.17 | UAE Dirham 3.06 | US $0.85 | MYR 3.71 |
60.3MM OD X 3.5MM WIDTH X 6M LENGTH ASTM A312 GRADE TP310S STAINLESS STEEL SEAMLESS HOT FINISHED PIPES | SGD 5.89 | UAE Dirham 15.37 | US $4.25 | MYR 18.64 |
273 MM OD X 8.7 MM THK X ABOVE 5000 MM LENGTH GRADE TP316 STAINLESS STEEL SEAMILESS PIPE | SGD 3.92 | UAE Dirham 10.25 | US $2.83 | MYR 12.43 |
273.1MM OD X 23.90MM THK X 5.5-6.2M LENGHT ASTM A312 GRADE TP347 STAINLESS STEEL SEAMLESS PIPE HOT FINISHED | SGD 5.27 | UAE Dirham 13.77 | US $3.81 | MYR 16.70 |
OD 219.1 MM X WT 12.7 MM X LG 13300 MM ASTM A312 TP347H SEAMLESS STAINLESS STEEL PIPES COLD FINISHED | SGD 6.03 | UAE Dirham 15.75 | US $4.36 | MYR 19.10 |
OD.42.4 X 3.20 X 5000-5800 ASTM/ASME A/SA-312 EN10216-5 GRADE TP321/1.4541 STAINLESS STEEL SEAMLESS HOT FINISHED PIPES | SGD 3.40 | UAE Dirham 8.88 | US $2.46 | MYR 10.77 |
12NB X SCH 40 CARBON STEEL SMLS PIPE TO ASTM A 53 GR.B IN 6000MM LONG, NACE MR 0175 | SGD 2,133.97 | UAE Dirham 5,572.04 | US $1,541.20 | MYR 6,757.58 |
10 X SCH 80 A790 S31803 DUPLEX STEEL WELDED PIPE | SGD 4,325.74 | UAE Dirham 11,294.99 | US $3,124.15 | MYR 13,698.18 |
1.50 NB, SCH 40s LENGTH 6.00 MTRS SUPER DUPLEX STAINLESS STEEL UNS S32750 SMLS PIPE | SGD 631.60 | UAE Dirham 1,649.18 | US $456.16 | MYR 2,000.07 |
ASTM A312 SS Square Tube
Welded SA 312 TP 316L Tubes
Stainless Steel 304L Round Pipe
SS UNS S30400 Welded Pipe
ASTM A312 Gr TP304 Hollow Pipe
TP 304 SS Coiled Tubing
SA 312 TP 316 Pipes
304 Stainless Steel Clad Pipe
ASTM A312 TP 310 SS Exhaust Tube
ASTM A213 304 Pipe
Seamless Pipe
High Pressure SS 316L Tubing
ASME SA 312 Grade 304H Gas Tube
ASTM A249 SS Instrument Tubing
ASTM A312 Stainless Steel 347 Clad Pipe
347H SS Thin Pipes
SS 904L Tubes
ASTM A106 Carbon Steel Seamless Pipe
ASTM A106 Carbon Steel Gr. B Square Pipe
ASTM A312 TP 310 Heat Exchanger Tube
Seamless AISI 316L Tube
Carbon Steel Grade 6 Round Tube
ASME SA106 Carbon Steel Capillary Tube
ASTM A672 Carbon Steel Rectangular Tubing
Outside Diameter | Birmingham Wire Gauge (BWG) | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
20 (0.889mm) | 18 (1.245mm) | 16 (1.651mm) | 15 (1.829mm) | 14 (2.108mm) | 13 (2.413mm) | 12 (2.769mm) | 11 (3.048mm) | 10 (3.403mm) | |||
in | mm | Weight, kg/m (average wall1) | |||||||||
0.250 | 1/4 | 6.350 | 0.12 | 0.16 | 0.19 | - | - | - | - | - | - |
0.313 | 5/16 | 7.950 | 0.15 | 0.21 | 0.25 | 0.28 | - | - | - | - | - |
0.375 | 3/8 | 9.525 | 0.19 | 0.25 | 0.31 | 0.34 | 0.39 | - | - | - | - |
0.500 | 1/2 | 12.700 | 0.25 | 0.34 | 0.45 | 0.49 | 0.55 | 0.61 | 0.68 | 0.72 | - |
0.625 | 5/8 | 15.875 | 0.33 | 0.45 | 0.58 | 0.64 | 0.71 | 0.80 | 0.89 | 0.97 | - |
0.750 | 3/4 | 19.050 | 0.40 | 0.55 | 0.72 | 0.77 | 0.88 | 0.98 | 1.12 | 1.20 | 1.31 |
0.875 | 7/8 | 22.225 | 0.46 | 0.64 | 0.83 | 0.92 | 1.04 | 1.18 | 1.32 | 1.44 | 1.58 |
1.000 | 1 | 25.400 | 0.54 | 0.74 | 0.97 | 1.06 | 1.21 | 1.37 | 1.55 | 1.68 | 1.92 |
1.125 | 11/8 | 28.575 | 0.61 | 0.83 | 1.10 | 1.21 | 1.37 | 1.56 | 1.76 | 1.92 | 2.11 |
1.250 | 11/4 | 31.750 | 0.68 | 0.94 | 1.23 | 1.35 | 1.53 | 1.76 | 1.96 | 2.16 | 2.40 |
1.375 | 13/8 | 34.925 | 0.74 | 1.03 | 1.35 | 1.49 | 1.70 | 1.93 | 2.19 | 2.40 | 2.65 |
1.500 | 11/2 | 38.100 | 0.82 | 1.13 | 1.49 | 1.64 | 1.87 | 2.17 | 2.40 | 2.63 | 2.92 |
1.750 | 13/4 | 44.450 | 0.97 | 1.32 | 1.74 | 1.92 | 2.20 | 2.50 | 2.84 | 3.10 | 3.44 |
2.000 | 2 | 50.800 | - | 1.52 | 1.99 | 2.20 | 2.53 | 2.89 | 3.27 | 3.59 | 3.97 |
2.250 | 21/4 | 57.150 | - | 1.73 | 2.26 | 2.48 | 2.87 | 3.26 | 3.70 | 4.06 | 4.51 |
2.375 | 23/8 | 60.325 | - | 1.81 | 2.38 | 2.63 | 3.02 | 3.44 | 3.93 | 4.30 | 4.78 |
2.500 | 21/2 | 63.500 | - | 1.91 | 2.52 | 2.78 | 3.18 | 3.66 | 4.14 | 4.54 | 5.04 |
2.875 | 27/8 | 73.025 | - | 2.20 | 2.90 | 3.20 | 3.68 | 4.20 | 4.79 | 5.25 | 5.83 |
3.000 | 3 | 76.200 | - | 2.31 | 3.04 | 3.35 | 3.85 | 4.39 | 5.00 | 5.49 | 6.10 |
3.500 | 31/2 | 88.900 | - | 2.69 | 3.56 | 3.93 | 4.51 | 5.15 | 5.86 | 6.44 | 7.17 |
4.000 | 4 | 101.60 | - | - | 4.11 | 4.54 | 5.21 | 5.95 | 6.80 | 7.47 | 8.30 |
Description | Size | Over | Under |
---|---|---|---|
Weight | NPS 14 (DN 350) and above (Note-1) | 10% | 5% |
Weight | NPS 12 (DN 300) and under | 10% | 3.50% |
Wall Thickness | |||
Forged and Bored Pipe | 1/8 in.(3.2mm) | Nil | |
Seamless and Welded Pipe | 3 to 18 incl., t/D up to 5 % incl. | 22.50% | 12.50% |
1⁄8 to 2 ½, incl., all t/D ratios (Note-2) | 20.00% | 12.50% | |
20 and larger, seamless, t/D up to 5 % incl. | 22.50% | 12.50% | |
20 and larger, welded, all t/D ratios (Note-3) | 17.50% | 12.50% | |
3 to 18 incl., t/D > 5 % | 15.00% | 12.50% | |
20 and larger, seamless, t/D > 5 % | 15.00% | 12.50% | |
Cast Pipe | 1/6 in.(1.6mm) | Nil | |
Inside Diameter for Cast Pipe | Nil | 1⁄16 in. (1.6 mm) | |
Outside Diameter (Note-4) | |||
DiameterOutside | Over 1 ½ to 4, incl | 1/32 in. (0.8mm) | 1/32 in. (0.8mm) |
1⁄8 to 11⁄2, incl | 1⁄64 in. (0.4mm) | 1/32 in. (0.8mm) | |
Over 8 to 18, incl | 3/32 in. (2.4mm) | 1/32 in. (0.8mm) | |
Over 4 to 8, inc | 1/16 in. (1.6mm) | 1/32 in. (0.8mm) | |
Over 26 to 34, incl | 5/32 in. (4.0mm) | 1/32 in. (0.8mm) | |
Over 18 to 26, incl | 1/8 in. (3.2mm) | 1/32 in. (0.8mm) | |
Over 34 | 3/8 in. (4.8mm) | 1/32 in. (0.8mm) | |
As per ASTM A530/A530M-12 and ASTM A999/A999M-15 |
SIZE | KG/M | SIZE MM | KG/M | SIZE | KG/M |
---|---|---|---|---|---|
100 x 100 x 4 | 12 | 40 x 40 x 3 | 3.5 | 180 x 180 x 13 | 65.2 |
100 x 100 x 5 | 14.8 | 40 x 40 x 3.2 | 3.7 | 180 x 180 x 16 | 81.4 |
100 x 100 x 6.3 | 18.4 | 40 x 40 x 4 | 4.5 | 200 x 200 x 6.3 | 38.2 |
100 x 100 x 8 | 23 | 50 x 50 x 3 | 4.4 | 200 x 200 x 8 | 48 |
100 x 100 x 10 | 27.9 | 50 x 50 x 3.2 | 4.7 | 200 x 200 x 10 | 59.3 |
120 x 120 x 5 | 18 | 50 x 50 x 4 | 5.7 | 200 x 200 x 12.5 | 73 |
120 x 120 x 6.3 | 22.3 | 50 x 50 x 5 | 7 | 200 x 200 x 16 | 91.5 |
120 x 120 x 8 | 27.9 | 60 x 60 x 3.2 | 5.7 | 250 x 250 x 6.3 | 48.1 |
120 x 120 x 10 | 34.2 | 60 x 60 x 4 | 7 | 250 x 250 x 8 | 60.5 |
120 x 120 x 13 | 41.6 | 60 x 60 x 5 | 8.5 | 250 x 250 x 10 | 75 |
150 x 150 x 5 | 22.7 | 60 x 60 x 6.3 | 10.5 | 250 x 250 x 12.5 | 92.6 |
150 x 150 x 6.3 | 28.3 | 70 x 70 x 3.6 | 7.5 | 250 x 250 x 16 | 117 |
150 x 150 x 8 | 35.4 | 70 x 70 x 5 | 10.1 | 300 x 300 x 8 | 73.1 |
150 x 150 x 10 | 43.6 | 70 x 70 x 6.3 | 12.5 | 300 x 300 x 10 | 90.7 |
150 x 150 x 13 | 53.4 | 80 x 80 x 3.6 | 8.6 | 300 x 300 x 12.5 | 112 |
150 x 150 x 16 | 66.4 | 80 x 80 x 5 | 11.7 | 300 x 300 x 16 | 142 |
180 x 180 x 5 | 27.4 | 80 x 80 x 6.3 | 14.4 | 350 x 350 x 8 | 85.7 |
180 x 180 x 6.3 | 34.2 | 90 x 90 x 3.6 | 9.7 | 350 x 350 x 12.5 | 132 |
180 x 180 x 8 | 43 | 90 x 90 x 5 | 13.3 | 350 x 350 x 16 | 167 |
180 x 180 x 10 | 53 | 90 x 90 x 6.3 | 16.4 | 400 x 400 x 10 | 122 |
400 x 400 x 12.5 | 152 | ||||
400 x 400 x 16 | 192 |
Metric Dimensions
OD | Wall thickness, mm | ||||||
---|---|---|---|---|---|---|---|
0.5 | 1.0 | 1.5 | 2.0 | 2.5 | 3.0 | 4.0 | |
mm | Weight, kg/m (conventional weights) | ||||||
8 | 0.176 | 0.245 | |||||
6 | 0.069 | 0.126 | 0.170 | ||||
10 | 0.226 | 0.321 | 0.403 | ||||
14 | 0.462 | 0.604 | |||||
12 | 0.277 | 0.369 | 0.503 | ||||
15 | 0.352 | 0.510 | 0.654 | ||||
16 | 0.547 | 0.705 | |||||
18 | 0.623 | ||||||
20 | 0.698 | 0.888 | 1.28 | ||||
22 | 0.774 | 1.02 | |||||
25 | 0.887 | 1.16 | 1.43 | 1.66 | |||
28 | 1.00 | 1.31 | |||||
30 | 1.41 | 2.04 | |||||
36 | 1.66 | ||||||
38 | 2.64 | 3.42 | |||||
40 | 1.91 | ||||||
42 | 2.01 | ||||||
50 | 2.42 |
Imperial Dimensions
OD | Wall thickness, in | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
0.020 | 0.022 | 0.028 | 0.035 | 0.036 | 0.048 | 0.064 | 0.080 | 0.104 | 0.125 | 0.188 | 0.250 | 0.375 | |
in | Weight, kg/m (conventional weights) | ||||||||||||
3/16 | 0.059 | 0.072 | 0.088 | 0.109 | |||||||||
1/8 | 0.034 | 0.037 | 0.044 | 0.052 | |||||||||
1/4 | 0.075 | 0.081 | 0.101 | 0.125 | 0.157 | 0.193 | |||||||
3/8 | 0.157 | 0.200 | 0.254 | 0.323 | 0.383 | 0.507 | |||||||
5/16 | 0.129 | 0.161 | 0.206 | 0.258 | |||||||||
7/16 | 0.234 | 0.390 | |||||||||||
5/8 | 0.344 | 0.449 | 0.582 | 0.714 | 1.01 | ||||||||
1/2 | 0.214 | 0.264 | 0.273 | 0.352 | 0.452 | 0.545 | 0.760 | ||||||
3/4 | 0.417 | 0.546 | 0.712 | 0.869 | 1.09 | 1.27 | 1.71 | ||||||
1 | 0.563 | 0.741 | 0.971 | 1.19 | 1.51 | 1.77 | 2.48 | 3.04 | 3.80 | ||||
7/8 | 0.643 | 0.841 | 1.03 | 1.52 | |||||||||
11/8 | 0.838 | 1.10 | |||||||||||
11/4 | 0.944 | 1.23 | 1.52 | 2.28 | |||||||||
13/8 | 0.781 | 1.36 | |||||||||||
11/2 | 0.854 | 1.49 | 1.84 | 2.79 | 4.00 | 5.07 | |||||||
15/8 | 1.62 | ||||||||||||
13/4 | 1.32 | 1.75 | 3.29 | ||||||||||
2 | 2.01 | 3.80 | 7.09 | ||||||||||
21/4 | 4.31 | 8.11 | |||||||||||
21/2 | 2.53 | 4.81 | 9.12 | ||||||||||
23/4 | 2.79 | ||||||||||||
3 | 3.05 | 3.79 | 5.83 | 11.1 | |||||||||
31/2 | 13.2 | ||||||||||||
4 | 7.85 | 15.2 | |||||||||||
5 | 19.4 | ||||||||||||
6 | 23.5 |
Outside Diameter (OD) | Wall Thickness (t) | Variations in OD Under Over | Variation in t Under Over | ||||||
---|---|---|---|---|---|---|---|---|---|
in | mm | mm | in | mm | in | in | mm | % | % |
1/2 to <11/2 | 12.7 to <38.1 | −>1.6 | −>0.065 | 0.13 | 0.005 | 0.005 | 0.13 | 10 | 10 |
<1/2 | <12.7 | All | All | 0.13 | 0.005 | 0.005 | 0.13 | 15 | 15 |
1/2 to <11/2 | 12.7 to <38.1 | <1.61 | <0.0651 | 0.13 | 0.005 | 0.005 | 0.13 | 10 | 10 |
11/2 to <31/2 | 38.1 to <88.9 | <2.41 | <0.0951 | 0.25 | 0.010 | 0.010 | 0.25 | 10 | 10 |
11/2 to <31/2 | 38.1 to <88.9 | −>2.4 | −>0.095 | 0.25 | 0.010 | 0.010 | 0.25 | 10 | 10 |
31/2 to <51/2 | 88.9 to <139.7 | −>3.8 | −>0.150 | 0.38 | 0.015 | 0.015 | 0.38 | 10 | 10 |
51/2 to <−8 | 139.1 to <−203.2 | −>3.8 | −>0.150 | 0.76 | 0.030 | 0.030 | 0.76 | 10 | 10 |
31/2 to <51/2 | 88.9 to <139.7 | <3.81 | <0.1501 | 0.38 | 0.015 | 0.015 | 0.38 | 10 | 10 |
51/2 to <−8 | 139.1 to <−203.2 | <3.81 | <0.1501 | 0.76 | 0.030 | 0.030 | 0.76 | 10 | 10 |
NPS | Wall Thickness (t)2 Under Over | Outside Diameter (OD)1 Under Over | Weight3 Under Over | |||||
---|---|---|---|---|---|---|---|---|
% | % | mm | in | in | mm | % | % | |
1/8 to 11/2 | 12.5 | 20 | 0.8 | 0.031 | 0.015 | 0.4 | 10 | 3.5 |
>11/2 to 4 | 12.5 | 20 | 0.8 | 0.031 | 0.031 | 0.8 | 10 | 3.5 |
>4 to 8 | 12.5 | 22.5 | 0.8 | 0.031 | 0.062 | 1.6 | 10 | 3.5 |
>8 to 12 | 12.5 | 22.5 | 0.8 | 0.031 | 0.093 | 2.4 | 10 | 3.5 |
>12 to 18 | 12.5 | 22.5 | 0.8 | 0.031 | 0.093 | 2.4 | 10 | 5 |
>18 to 26 | 12.5 | 22.5 | 0.8 | 0.031 | 0.125 | 3.2 | 10 | 5 |
>26 to 34 | 12.5 | 22.5 | 0.8 | 0.031 | 0.156 | 4.0 | 10 | 5 |
>34 to 48 | 12.5 | 22.5 | 0.8 | 0.031 | 0.187 | 4.8 | 10 | 5 |
Grade | UNS | Chromium Cr | Manganese Mn | Tantalum Ta | Phosphorus P | Copper Cu | Vanadium Va | Sulphur S | Niobium Nb | Silicon Si | Titanium Ti | Nitrogen N | Tungsten W | Molybdenum Mo | Cerium Ce | Boron Bo | Carbon C | Nickel Ni | Aluminium Al | Selenium Se |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
201 | S20100 | 16.00- 18.00 | 5.50-7.50 | - | 0.060 | - | 0.030 | - | 1.00 | - | 0.25 | - | - | - | - | 0.15 | 3.5- 5.5 | - | - | |
202 | S20200 | 17.00- 19.00 | 7.50-10.0 | - | 0.060 | - | 0.030 | - | 1.00 | - | 0.25 | - | - | - | - | 0.15 | 4.00- 6.00 | - | - | |
301 | S30100 | 16.00- 18.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 1.00 | - | 0.10 | - | - | - | - | 0.15 | 6.00- 8.00 | - | - |
302 | S30200 | 17.00- 19.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | 0.10 | - | - | - | - | 0.15 | 8.00- 10.00 | - | - |
304 | S30400 | 17.50- 19.50 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | 0.10 | - | - | - | - | 0.07 | 8.00- 10.50 | - | - |
304L | S30403 | 17.50- 19.50 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | 0.10 | - | - | - | - | 0.030 | 8.00- 12.00 | - | - |
304H | S30409 | 18.00- 20.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | - | - | - | - | - | 0.04- 0.10 | 8.00- 10.50 | - | - |
309S | S30908 | 22.00- 24.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | - | - | - | - | - | 0.08 | 12.00- 15.00 | - | - |
310S | S31008 | 24.00- 26.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 1.50 | - | - | - | - | - | - | 0.08 | 19.00- 22.00 | - | - |
310H | S31009 | 24.00- 26.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | - | - | - | - | - | 0.04- 0.10 | 19.00- 22.00 | - | - |
316 | S31600 | 16.00- 18.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | 0.10 | - | 2.00-3.00 | - | - | 0.08 | 10.00- 14.00 | - | - |
316L | S31603 | 16.00- 18.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | 0.10 | - | 2.00-3.00 | - | - | 0.03 | 10.00- 14.00 | - | - |
316H | S31609 | 16.00- 18.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | - | 2.00-3.00 | - | - | 0.04- 0.10 | 10.00- 14.00 | - | - | |
317 | S31700 | 18.00- 20.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | 0.10 | - | 3.00-4.00 | - | - | 0.08 | 11.00- 15.00 | - | - |
317L | S31703 | 18.00- 20.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | - | 0.10 | - | 3.00-4.00 | - | - | 0.03 | 11.00- 15.00 | - | - |
321 | S32100 | 17.00- 19.00 | 2.00 | - | 0.045 | - | - | 0.030 | - | 0.75 | 5x(C+N) min, 0.70 max | 0.10 | - | - | - | - | 0.08 | 9.00- 12.00 | - | - |
347 | S34700 | 17.00- 19.00 | 2.00 | - | 0.045 | - | - | 0.030 | 10xC min, 1.00 max | 0.75 | - | - | - | - | - | - | 0.08 | 9.00- 13.00 | - | - |
409 | S40910 | 10.50- 11.70 | 1.00 | - | 0.040 | - | - | 0.020 | 0.17 | 1.00 | 6xC min, 0.5 max | 0.03 | - | - | - | - | 0.03 | 0.50 | - | - |
410 | S41000 | 11.5- 13.5 | 1.00 | - | 0.040 | - | - | 0.030 | - | 1.00 | - | - | - | - | - | - | 0.08- 0.15 | 0.75 | - | - |
430 | S43000 | 16.00- 18.00 | 1.00 | - | 0.040 | - | - | 0.030 | - | 1.00 | - | - | - | - | - | - | 0.12 | 0.75 | - | - |
439 | S43035 | 17.00- 19.00 | 1.00 | - | 0.040 | - | - | 0.030 | - | 1.00 | 0.20 + 4(C+N) min, 1.10 max | 0.03 | - | - | - | - | 0.03 | 0.050 | 0.15 | - |
Grade | Hardness(Max) ASTM E18 Brinell | Tensile Strength min. ksi [MPa] | Hardness(Max) ASTM E18 Rockwell | Yield Strength min. ksi [MPa] | Elongation in 2in or 50mm length % (min) |
---|---|---|---|---|---|
201 | 219 HBW | 95 [655] | 95 HRB | 38 [260] | 35 |
304 | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
304L | 192 HBW | 70 [485] | 90 HRB | 25 [170] | 35 |
304H | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
304N | 192 HBW | 80 [550] | 90 HRB | 35 [240] | 35 |
309S | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
309H | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
310S | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
310H | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
316 | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
316L | 192 HBW | 70 [485] | 90 HRB | 25 [170] | 35 |
316H | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
316Ti | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
317 | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 34 |
317L | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
321 | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
321H | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
347 | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
TP347H | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 35 |
N08904 | 192 HBW | 71 [490] | 90 HRB | 31 [215] | 35 |
N08020 | 217 HBW | 80 [550] | 95 HRB | 35 [240] | 30 |
800 N08800 Cold Work | 192 HBW | 75 [515] | 90 HRB | 30 [205] | 30 |
800H N08810 | 192 HBW | 65 [450] | 90 HRB | 25 [170] | 30 |
800HT N08811 | 192 HBW | 65 [450] | 90 HRB | 25 [170] | 30 |
N10276 | 100 [690] | 41 [283] | 40 | ||
N06022 | 100 [690] | 45 [310] | 45 | ||
S31803 | 290 HBW | 90 [620] | 30 HRC | 65 [450] | 25 |
S31803 | 290 HBW | 90 [620] | 30 HRC | 65 [450] | 25 |
S32101 | 290 HBW | 101 [700] Wall≤0.187 in. [5.00 mm] | 30 HRC | 77 [530] Wall≤0.187 in. [5.00 mm] | 30 |
S32205 | 290 HBW | 95 [655] | 30 HRC | 70 [485] | 25 |
S32550 | 297 HBW | 110 [760] | 31 HRC | 80 [550] | 15 |
S32304 | … 290 HBW | 100 [690] OD 1 in. [25 mm] and Under 87 [600] OD over 1 in. [25 mm] | … 30 HRC | 65 [450] OD 1 in. [25 mm] and Under 58 [400] OD over 1 in. [25 mm] | 25 25 |
S32750 | 300 HBW | 116 [800] | 32 HRC | 80 [550] | 15 |
S32760 | 300 HBW | 109 [750] | … | 80 [550] | 25 |
CSN czeska | PN polska | EN 10088 europejska | AISI / ASTM amerykańska | GOST rosyjska | DIN niemiecka | SS szwedzka | ||
---|---|---|---|---|---|---|---|---|
heat-resistant steel | ferrite | 17125 | H13JS | 1.4724 | 10Ch13SJu | X10CrAlSi13 | ||
H18JS | 1.4742 | 15Ch18SJu | X10CrAlSi18 | |||||
H24JS | 1.4762 | (446) | X10CrAlSi25 | |||||
austenite | 17251 | H20N12S2 | 1.4828 | 309 | 20Ch20N14S2 | X15CrNiSi20-12 | ||
H25N20S2 | 1.4841 | 310 314 | 20Ch25N20S2 | X15CrNiSi25-21 | ||||
H23N18 | 1.4843 | ChN20JuS | X16CrNi25-20 | |||||
17255 | 1.4845 | 310S | 20Ch23N18 | X8CrNiSi25-21 | 2361 | |||
17253 | H16N36S2 | 1.4864 | 330 | X12NiCrSi35-16 | ||||
stainless and acid-resistant steel | ferrite | 17020 | 0H13 | 1.4000 | 410S | 0Ch13 | X6Cr13 | 2301 |
1.4003 | X2CrNi12 | |||||||
17040 | H17 | 1.4016 | 430 | 12Ch17 | C6Cr17 | 2320 | ||
0H17T | 1.4510 | 430Ti 439 | 08Ch17T | X3CrTi17 | ||||
martenzyty | 17021 | 1H13 | 1.4006 | 410 | 12Ch13 15Ch13L | X12Cr13 | 2302 | |
17022 | 2H13 | 1.4021 | 420 | 20Ch13 | X20Cr13 | 2303 | ||
17023 | 3H13 | 1.4028 | 420F | 30Ch13 | X30Cr13 | 2304 | ||
17024 | 4H13 | 1.4031 | 420 | 40Ch13 | X39Cr13 | |||
17024 | 4H13 | 1.4034 | 420 | 40Ch13 | X46Cr13 | |||
3H17M | 1.4122 | X39CrMo17-1 | ||||||
austenite | 17240 | 0H18N9 | 1.4301 | 304 | 08Ch18N10 | X5CrNi18-10 | 2332 2333 | |
17249 | 00H18N10 | 1.4306 | 304L | 03Ch18N11 | X2CrNi19-11 | 2352 | ||
1.4307 | (304L) | X2CrNi18-9 | ||||||
17241 | 1H18N9 | 1.4310 | 301 | X10CrNi18-8 | 2331 | |||
1.4311 | 304LN | X2CrNiN18-10 | 2371 | |||||
17346 | 0H17N12M2T | 1.4401 | 316 | 08Ch16N11M3 | X5CrNiMo17-12-2 | 2347 | ||
17349 | 00H17N14M2 | 1.4404 | 316L | X2CrNiMo17-12-2 | 2348 | |||
1.4429 | 316LN | X2CrNiMoN17-13-3 | 2375 | |||||
17350 | 1.4435 | 316L | 03Ch17N14M3 | X2CrNiMo18-14-3 | 2353 | |||
0H22N24 M4TCu | 1.4539 | 904L N 08904 | X1NiCrMoCu 25-20-5 | 2562 | ||||
17248 17247 | 1H18N9T 1H18N10T 0H18N10T | 1.4541 | 321 | 06Ch18N10T 08Ch18N10T 09Ch18N10T 12Ch18N10T | X6CrNiTi18-10 | 2337 | ||
17348 | H17N13M2T H18N10MT | 1.4571 | 316Ti | 08Ch16N11M3T 10Ch17N13M2T | X6CrNiMoTi17-12-2 | 2350 | ||
duplex | 1.4362 | S 32304 | X2CrNiN23-4 | 2327 | ||||
422942 | LH18N10M2 | 1.4410 | X2CrNiMoN25-7-4 | 2328 | ||||
1.4462 | S 31803 | X2CrNiMoN22-5-3 | 2377 |
Carbon Steel | Nominal Pipe Size | Stainless Steel | ||
---|---|---|---|---|
ASTM A53M | ASTM A106M | NPS | DN | ASTM A999M |
±1% | +4.8 / -0.8 mm | Over 34 to 48 | Over 850 to 1200 | +4.8 / -0.8 mm |
±1% | ±0.8 mm | Over 1½ to 4 | Over 40 to 100 | ±0.8 mm |
±0.4 mm | ±0.4 mm | ⅛ to 1½ | 6 to 40 | +0.4 / -0.8 mm |
±1% | +1.6 / -0.8 mm | Over 4 to 8 | Over 100 to 200 | +1.6 / -0.8 mm |
±1% | +3.2 / -0.8 mm | Over 18 to 26 | Over 450 to 650 | +3.2 / -0.8 mm |
±1% | +2.4 / -0.8 mm | Over 8 to 18 | Over 200 to 450 | +2.4 / -0.8 mm |
±1% | +4.0 / -0.8 mm | Over 26 to 34 | Over 650 to 850 | +4.0 / -0.8 mm |
OD | Wall thickness, mm | |||
---|---|---|---|---|
0.5 | 1.0 | 1.5 | 2.0 | |
mm | Weight, kg/m (conventional weights) | |||
8 | 0.176 | 0.245 | ||
6 | 0.069 | 0.126 | 0.170 | |
10 | 0.226 | 0.321 | 0.403 | |
14 | 0.462 | 0.604 | ||
12 | 0.277 | 0.369 | 0.503 | |
15 | 0.352 | 0.510 | 0.654 |
Grade | UNS | Yield Strength min | Tensile Strength min | Elongation in 2 in (50mm) or 4D min | |||
---|---|---|---|---|---|---|---|
MPa | ksi | MPa | ksi | Trans % | Longit % | ||
All | All | 205 | 30 | 515 | 75 | 25 | 35 |
TP304L | S30403 | 170 | 25 | 485 | 70 | 25 | 35 |
TP304N | S30451 | 240 | 35 | 550 | 80 | 25 | 35 |
S31272 | 200 | 29 | 450 | 65 | 25 | 35 | |
TP316L | S31603 | 170 | 25 | 485 | 70 | 25 | 35 |
TP316N | S31651 | 240 | 35 | 550 | 80 | 25 | 35 |
TP321 | S32100 | 205(1701) | 30(251) | 515(4851) | 75(701) | 25 | 35 |
TP321H | S32109 | 205(1701) | 30(251) | 515(4851) | 75(701) | 25 | 35 |
Metallurgical
Destructive
Hydro Test
NDT
Visual
Dimension
Marking
Nominal Pipe Size | OD | Schedule 10S1 | Schedule 5S1 | Schedule 80S | Schedule 40S | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
mm | in | mm | in | kg/m | mm | in | kg/m | mm | in | kg/m | in | kg/m | mm | |
1/8 | 10.3 | 0.405 | 1.24 | 0.049 | 0.28 | - | - | - | 2.41 | 0.095 | 0.47 | 0.068 | 0.37 | 1.73 |
1/4 | 13.7 | 0.540 | 1.65 | 0.065 | 0.49 | - | - | - | 3.02 | 0.119 | 0.80 | 0.088 | 0.63 | 2.24 |
3/8 | 17.1 | 0.675 | 1.65 | 0.065 | 0.63 | - | - | - | 3.20 | 0.126 | 1.10 | 0.091 | 0.84 | 2.31 |
1/2 | 21.3 | 0.840 | 2.11 | 0.083 | 1.00 | 1.65 | 0.065 | 0.80 | 3.73 | 0.147 | 1.62 | 0.109 | 1.27 | 2.77 |
3/4 | 26.7 | 1.050 | 2.11 | 0.083 | 1.28 | 1.65 | 0.065 | 1.03 | 3.91 | 0.154 | 2.20 | 0.113 | 1.69 | 2.87 |
1 | 33.4 | 1.315 | 2.77 | 0.109 | 2.09 | 1.65 | 0.065 | 1.30 | 4.55 | 0.179 | 3.24 | 0.133 | 2.50 | 3.38 |
11/4 | 42.2 | 1.660 | 2.77 | 0.109 | 2.70 | 1.65 | 0.065 | 1.65 | 4.85 | 0.191 | 4.47 | 0.140 | 3.39 | 3.56 |
11/2 | 48.3 | 1.900 | 2.77 | 0.109 | 3.11 | 1.65 | 0.065 | 1.91 | 5.08 | 0.200 | 5.41 | 0.145 | 4.05 | 3.68 |
2 | 60.3 | 2.375 | 2.77 | 0.109 | 3.93 | 1.65 | 0.065 | 2.40 | 5.54 | 0.218 | 7.48 | 0.154 | 5.44 | 3.91 |
21/2 | 73.0 | 2.875 | 3.05 | 0.120 | 5.26 | 2.11 | 0.083 | 3.69 | 7.01 | 0.276 | 11.41 | 0.203 | 8.63 | 5.16 |
3 | 88.9 | 3.500 | 3.05 | 0.120 | 6.45 | 2.11 | 0.083 | 4.51 | 7.62 | 0.300 | 15.27 | 0.216 | 11.29 | 5.49 |
31/2 | 101.6 | 4.000 | 3.05 | 0.120 | 7.40 | 2.11 | 0.083 | 5.18 | 8.08 | 0.318 | 18.63 | 0.226 | 13.57 | 5.74 |
4 | 114.3 | 4.500 | 3.05 | 0.120 | 8.36 | 2.11 | 0.083 | 5.84 | 8.56 | 0.337 | 22.32 | 0.237 | 16.07 | 6.02 |
5 | 141.3 | 5.563 | 3.40 | 0.134 | 11.57 | 2.77 | 0.109 | 9.47 | 9.53 | 0.375 | 30.97 | 0.258 | 21.77 | 6.55 |
6 | 168.3 | 6.625 | 3.40 | 0.134 | 13.84 | 2.77 | 0.109 | 11.32 | 10.97 | 0.432 | 42.56 | 0.280 | 28.26 | 7.11 |
8 | 219.1 | 8.625 | 3.76 | 0.148 | 19.96 | 2.77 | 0.109 | 14.79 | 12.70 | 0.500 | 64.64 | 0.322 | 42.55 | 8.18 |
10 | 273.1 | 10.750 | 4.19 | 0.165 | 27.78 | 3.40 | 0.134 | 22.63 | 12.702 | 0.5002 | 96.012 | 0.365 | 60.31 | 9.27 |
12 | 323.9 | 12.750 | 4.57 | 0.180 | 36.00 | 3.96 | 0.156 | 31.25 | 12.702 | 0.5002 | 132.082 | 0.3752 | 73.882 | 9.532 |
14 | 355.6 | 14.000 | 4.782 | 0.1882 | 41.302 | 3.96 | 0.156 | 34.36 | - | - | - | - | - | - |
16 | 406.4 | 16.000 | 4.782 | 0.1882 | 47.292 | 4.19 | 0.165 | 41.56 | - | - | - | - | - | - |
18 | 457 | 18.000 | 4.782 | 0.1882 | 53.262 | 4.19 | 0.165 | 46.81 | - | - | - | - | - | - |
20 | 508 | 20.000 | 5.542 | 0.2182 | 68.612 | 4.78 | 0.188 | 59.25 | - | - | - | - | - | - |
22 | 559 | 22.000 | 5.542 | 0.2182 | 75.532 | 4.78 | 0.188 | 65.24 | - | - | - | - | - | - |
24 | 610 | 24.000 | 6.35 | 0.250 | 94.45 | 5.54 | 0.218 | 82.47 | - | - | - | - | - | - |
30 | 762 | 30.000 | 7.92 | 0.312 | 147.36 | 6.35 | 0.250 | 118.31 | - | - | - | - | - | - |
Nominal Pipe Size | OD | Double Extra Strong (XXS) continued | Nominal Pipe Size | OD | Double Extra Strong (XXS) | |||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
in | mm | in | mm | kg/m | mm | in | mm | in | kg/m | |||
continued | 1/2 | 21.3 | 0.840 | 7.47 | 0.294 | 2.55 | ||||||
31/2 | 4.000 | 101.6 | - | - | - | 3/4 | 26.7 | 1.050 | 7.82 | 0.308 | 3.64 | |
4 | 4.500 | 114.3 | 0.674 | 17.12 | 41.03 | 1 | 33.4 | 1.315 | 9.09 | 0.358 | 5.45 | |
5 | 5.563 | 141.3 | 0.750 | 19.05 | 57.43 | 11/4 | 42.2 | 1.660 | 9.70 | 0.382 | 7.77 | |
6 | 6.625 | 168.3 | 0.864 | 21.95 | 79.22 | 11/2 | 48.3 | 1.900 | 10.15 | 0.400 | 9.56 | |
8 | 8.625 | 219.1 | 0.875 | 22.23 | 107.92 | 2 | 60.3 | 2.375 | 11.07 | 0.436 | 13.44 | |
10 | 10.750 | 273.0 | 1.000 | 25.40 | 155.15 | 21/2 | 73.0 | 2.875 | 14.02 | 0.552 | 20.39 | |
12 | 12.750 | 323.8 | 1.000 | 25.40 | 186.97 | 3 | 88.9 | 3.500 | 15.24 | 0.600 | 27.68 |
SIZE | KG/M | SIZE MM | KG/M | SIZE | KG/M |
---|---|---|---|---|---|
137.7 x 10 | 32 | 21.3 x 3.21 | 1.43 | 323.9 x 6.3 | 49.3 |
168.3 x 5 | 20.1 | 26.98 x 3.2 | 1.87 | 323.9 x 8 | 62.3 |
168.3 x 6.3 | 25.2 | 33.7 x 2.6 | 1.99 | 323.9 x 10 | 77.4 |
168.3 x 8 | 31.6 | 33.7 x 3.2 | 2.41 | 323.9 x 12.5 | 96 |
168.3 x 10 | 39 | 33.7 x 4 | 2.93 | 323.9 x 16 | 121 |
168.3 x 12.5 | 48 | 42.4 x 2.6 | 2.55 | 355.6 x 8 | 68.6 |
193.7 x 5 | 23.3 | 42.4 x 3.2 | 3.09 | 355.6 x 10 | 85.2 |
193.7 x 6.3 | 29.1 | 42.4 x 4 | 3.79 | 355.6 x 12.5 | 106 |
193.7 x 8 | 36.6 | 42.4 x 4 | 3.79 | 355.6 x 16 | 134 |
193.7 x 10 | 45.3 | 48.3 x 3.2 | 3.56 | 406.4 x 10 | 97.8 |
219.1 x 5 | 26.4 | 48.3 x 5 | 5.34 | 406.4 x 16 | 154 |
219.1 x 6.3 | 33.1 | 60.3 x 3.2 | 4.51 | 457 x 10 | 110 |
219.1 x 8 | 41.6 | 60.3 x 4 | 5.55 | 457 x 12.5 | 137 |
219.1 x 12.5 | 63.7 | 76.1 x 3.2 | 5.75 | 508 x 10 | 123 |
219.1 x 16 | 80.1 | 76.1 x 4 | 7.11 | 508 x 12.5 | 153 |
244.5 x 6.3 | 37 | 76.1 x 5 | 8.77 | 508 x 16 | 194 |
244.5 x 6.3 | 37 | 76.1 x 5 | 8.77 | 508 x 16 | 194 |
244.5 x 8 | 46.7 | 88.9 x 3.2 | 6.76 | 193.7 x 16 | 70.1 |
244.5 x 10 | 57.8 | 88.9 x 4 | 8.38 | 219.1 x 20 | 98.2 |
244.5 x 12.5 | 71.5 | 88.9 x 5 | 10.3 | 244.5 x 20 | 111 |
244.5 x 16 | 90.2 | 114.3 x 3.6 | 9.83 | 273 x 20 | 125 |
273 x 6.3 | 41.4 | 114.3 x 5 | 13.5 | 323.9 x 20 | 150 |
273 x 8 | 52.3 | 114.3 x 6.3 | 16.8 | 355.6 x 20 | 166 |
273 x 10 | 64.9 | 139.7 x 5 | 16.6 | 406.4 x 20 | 191 |
273 x 10 | 64.9 | 139.7 x 5 | 16.6 | 406.4 x 25 | 235 |
273 x 16 | 101 | 139.7 | 26 | 457 x 20 | 216 |
457 x 25 | 266 |
Outside Diameter | Standard Wire Gauge (SWG) | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
22 (0.711mm) | 20 (0.914mm) | 18 (1.218mm) | 16 (1.625mm) | 14 (2.032mm) | 12 (2.641mm) | 11 (2.946mm) | 10 (3.251mm) | |||
in | mm | Weight, kg/m (average wall1) | ||||||||
0.250 | 1/4 | 6.350 | - | 0.124 | 0.157 | 0.192 | - | - | - | - |
0.313 | 5/16 | 7.950 | - | 0.161 | 0.205 | 0.257 | - | - | - | - |
0.375 | 3/8 | 9.525 | - | 0.197 | 0.253 | 0.321 | 0.381 | - | - | - |
0.500 | 1/2 | 12.700 | 0.213 | 0.270 | 0.350 | 0.451 | 0.543 | 0.665 | 0.720 | - |
0.625 | 5/8 | 15.875 | 0.270 | 0.342 | 0.447 | 0.580 | 0.704 | 0.875 | 0.954 | - |
0.750 | 3/4 | 19.050 | - | 0.415 | 0.544 | 0.709 | 0.866 | 1.09 | 1.19 | 1.29 |
0.875 | 7/8 | 22.225 | 0.383 | 0.488 | 0.641 | 0.838 | 1.03 | 1.30 | 1.42 | 1.55 |
1.000 | 1 | 25.400 | 0.440 | 0.560 | 0.738 | 0.967 | 1.19 | 1.51 | 1.66 | 1.80 |
1.250 | 11/4 | 31.750 | 0.553 | 0.706 | 0.931 | 1.23 | 1.51 | 1.93 | 2.13 | 2.32 |
1.500 | 11/2 | 38.100 | 0.666 | 0.851 | 1.13 | 1.48 | 1.84 | 2.35 | 2.59 | 2.84 |
1.750 | 13/4 | 44.450 | 0.779 | 0.996 | 1.32 | 1.74 | 2.16 | 2.77 | 3.06 | 3.35 |
2.000 | 2 | 50.800 | 0.892 | 1.14 | 1.51 | 2.00 | 2.48 | 3.19 | 3.53 | 3.87 |
2.500 | 21/2 | 63.500 | - | - | 1.90 | 2.52 | 3.13 | 4.03 | 4.47 | 4.91 |
3.000 | 3 | 76.200 | - | - | 2.29 | 3.03 | 3.77 | 4.87 | 5.40 | 5.94 |
3.500 | 31/2 | 88.900 | - | - | 2.67 | 3.55 | 4.42 | 5.70 | 6.34 | 6.97 |
4.000 | 4 | 101.60 | - | - | 3.06 | 4.07 | 5.07 | 6.54 | 7.28 | 8.01 |
Nominal Pipe Size | Stainless Steel | Carbon Steel | |
---|---|---|---|
DN | NPS | ASTM A312M | ASTM A53M & 106M |
⅛ to 2½ | 6 to 65 | + 20 / -12.5% | -12.5% minimum (maximum wall thickness limited only by mass) |
80 to 450, t/D ≤ 5% | 3 to 18, t/D ≤ 5% | + 22.5 / -12.5% | |
80 to 450, t/D > 5% | 3 to 18, t/D > 5% | + 15 / -12.5% | |
500 and over – welded | 20 and over – welded | + 17.5 / -12.5% | |
20 and over – seamless, t/D ≤ 5% | 20 and over – seamless, t/D ≤ 5% | + 22.5 / -12.5% | |
20 and over – seamless, t/D > 5% | 20 and over – seamless, t/D > 5% | + 15 / -12.5% | |
t = nominal wall thickness | D = ordered outside diameter |
20 years of Experience as a supplier of these materials in below mentioned locations
ADCO - Onshore Gas Gathering & Injection For OGD3-Dubai
Northern Luzon Offshore Wind Power Project-Philippines
Millennium Water Treatment & Engineering Sdn. Bhd Malaysia
Laban And Diluted Laban- UAE
Energy Africa Limited -- South Africa
Binh Dai 1 - Phase 3-Vietnam