Pipe fittings are components that allow it to route the pipe for directional change, size change, and branch connections. The Duplex Pipe Fittings have a dual-certified austenitic and ferritic microstructure. These fittings ensure that they influence the characteristics of the flow in the system. Duplex 2205 Pipe Fittings have a chemical content of nickel, chromium, molybdenum, and nitrogen. The fittings have excellent resistance to reducing and corrosive media across harsh environments. The Duplex Steel Forged Fitting is produced at elevated pressures and has a lower surface porosity. These fittings possess a finer grain structure and have excellent strength. Duplex Steel S32205 Forged Fittings has a density of 7800 kg/m3 and has an elastic modulus of 190 GPA. These fittings have good thermal expansion and conductivity with an electrical resistivity of 850 nΩ.m. The Duplex Steel Socket Weld Fittings are recommended in small bore sizes of NPS 2 or smaller. These fittings have a socket wherein the pipe is inserted and welded using a single fillet weld. The fittings are common in low-pressure and temperature applications.
The ASTM A815 UNS S32205 Buttweld Tee has three openings shaped in the form of a T. These tees have one inlet with two outlets connecting the grade at 90 degrees to the main line. They are available in different sizes and specifications. A Duplex S31803 Pipe Bend is utilized in transportation lines that require pigging allowing for smooth flow. These bends are similar to elbows; however, they possess a larger radius of curvature than elbows. The SAF 2205 Concentric Reducer is a cone-shaped device that connects dissimilar piping equipment efficiently. These reducers have a matched centreline allowing for an even and efficient flow of media within the system.
Duplex 90 Degree Elbows
Werkstoff No 1.4462 180 Degree Elbows
Duplex Steel 2205 Stub End
ASTM A815 Duplex Steel Eccentric Reducer
Duplex Steel End Cap
Duplex 2205 Cross Tee
Duplex Steel S32205 Lap Joint Stub Ends
2205 Duplex 45 Degree Elbows
Duplex UNS S32205 Reducer
Duplex Steel Elbow
Duplex Pipe Fittings
UNS S32205 Laterals
ASME B16.11 Duplex Steel Reducing Tee
Duplex Cross Fitting
Duplex Stainless Steel Concentric Reducer
Duplex Steel Return Bends
Duplex 2205 Equal Tee
Duplex 2205 Pipe Fittings
Duplex Socket Weld Lateral Tee
ASTM A815 UNS S31803 Socket Weld Tee
ASTM A815 UNS S32205 Socket Weld Cross
Duplex Steel S32205 Socket Weld Caps
ASME SA815M Duplex Steel 2205 Socket Weld Coupling
Duplex UNS S32205 Socket Weld Union
Duplex Steel Hexagon Plugs
S31803 Duplex Threaded Bends
Duplex Steel 2205 Socket Weld Elbow
ASTM A815 Duplex Steel Threaded Cross
Duplex Steel Threaded Coupling
Duplex 2205 Threaded Elbow
2205 Duplex Hexagon Bushing
ASME B16.11 Duplex Threaded Tee
Duplex Stainless Steel Threaded Caps
Duplex Steel S32205 Threaded Union
ASME SA815M Duplex Square Plugs