Fittings help in connecting piping grades that can be routed, branched or their direction changed. These Brass Pipe Fittings are common fittings in the oil and gas industry that allows them to influence the characteristics of the media. These fittings have enhanced tolerance to reducing and corrosive affluents. The Brass Elbow allows for a smooth flow of media as they change the direction of the flow in the system. These elbows are generally produced in 45 and 90 degrees specifications. A Brass Tee is designed in the shape of a T. These tees allow for the mixing of media between the two channels received from the main line. They can be produced with equal and unequal specifications. A Brass Reducer helps in connecting piping diameters of unequal diameters. The reducer creates a gradual pressure drop and is available in eccentric or concentric specifications. Our institution is amongst the best Brass Fittings manufacturers in India who utilize the best technology to produce top-of-the-line products.
The Threaded Brass Pipe Fittings are screwed fittings that have threads on their surface. This allows the fittings to be easily connected to subsequent pipes. These fittings are seen in applications where stress on the system is low. A Brass Coupling is a versatile fitting that creates a permanent connection between two pipes. These couplings can handle different stress and vibrations. Brass Union is similar to a coupling, but it can be disconnected in the future for maintenance or repair. The Brass Plug is utilized to seal the ends of threaded pipes to terminate the flow of media in oil and gas applications. Brass Nipples are a short piece of pipe having a male pipe thread ensuring a watertight sealing.
The Brass Compression Fittings are strong fittings that create a secure connection. These fittings are less appealing and are very bulky. A Brass Bulkhead Fitting allows for the fittings to allow for free flow of liquids and gases in tanks, drums and other connections. The Brass Flare Fittings are soft ductile compression fittings that are usually cold worked. They are seen in high-pressure and temperature applications. A Brass Ferrule is made with a circular clamp that allows it to connect different grades in treacherous conditions.
Brass Reducing Tee
ASTM B62 Brass 45° Elbow
Brass Long Radius Elbow
1/2 x 1/2 Brass Female Elbow
Brass Stub End
Forged Brass End Cap
Brass Equal Cross
Industrial Brass 180° Elbow
Brass Hex Nipple
NPT Brass Plumbing Fittings
Brass Concentric Reducer
AS3688 Brass Short Radius Elbow
Brass 90° Elbow
15mm X 15mm Brass Equal Tee
ASTM B62 Brass Eccentric Reducer