DIN 2633 Flange Dimensions

Leading Manufacturer of DIN 2633 Pn16 Flange in India

A DIN 2633 flange is a device that provide strength to piping equipment as they are connected utilizing gaskets, bolts, or welds. The DIN 2633 Flange is produced either by forging or casting methods. The DIN 2633 grade flanges allow for easy installation and can be subsequently dissembled. A DIN 2633 Flange Material can be manufactured in stainless steel, carbon steel, alloy steel, copper steel, copper-nickel, titanium, brass, Inconel, duplex, super duplex, and nickel steel material. These flanges provide stability to different equipment across harsh conditions that are seen in different refineries and petrochemical industries. The DIN 2633 Flange Dimensions vary as per industry requirements. A standard flange is available with nominal diameters between 10 DN to 2000 DN. These flanges are available in different pressure conditions. A DIN 2633 Pn16 Flange is produced to operate at temperatures up to 16 bar. These flanges fit drillings and equipment of a wide spectrum of sizes.

The DIN 2633 Blind Flange is manufactured without a bore and help them to blank the ends of different piping equipment. These flanges are available in oversized bigger sizes allowing them to hold pressurized media across the oil and gas industry. A DIN 2633 Weld Neck Flange is referred to as a tapered flange due to its long neck that helps reduce the tension on the pipe. These flanges possess excellent strength and are compatible to operate at higher pressures and temperatures. The DIN 2633 Slip On Flange is fundamentally a ring that can be slid on a pipe and welded on all sides. These flanges are designed possessing a raised and flat face type. The low cost of these flanges makes them a viable option in the industry.

Supplier and Stockist of DIN 2633 Blind and Slip on Flanges in Mumbai

Specification	DIN 2633 Flange
Size	2", 1/2", 12", 4", 8", 6", 10", To 24" (Inche)
Thickness	SCH 20S/ SCH 40/ SCH 80/ SCH 100/ SCH 120/ SCH 140
Manimum Pressure	Class 150
Flanges Face	Ring type joint, Flat Face, RF
Materials	Alloy 20, Bronze, Incoloy, Inconel, Copper, Alloy Steel, Titanium, Cupro-Nickel, Brass, Stainless Steel, Nickel Alloys, Duplex Steel, Super Duplex, Hastalloy, Carbon Steel, Monel, Tantalum.
Available Type	Slip On/ Blind/ Weld Neck/ Threaded/ Plate Flanges

Description	Price Per Kg In Singapore	Price Per Kg In UAE	Price Per Kg In USD	Price Per Kg In Malaysia
DN 100/ 108/ 3.6 x PN 16 x WNRF x FORM C x DIN 2633	SGD 26.37	UAE Dirham 68.86	US $19.05	MYR 83.51
DN 500 x PN 16 x WNRF x DIN 2633 STAINLESS STEEL FLANGE	SGD 387.68	UAE Dirham 1,012.29	US $279.99	MYR 1,227.67
DN 80 x PN 16 x WNRF x DIN 2633 STAINLESS STEEL FLANGE	SGD 18.18	UAE Dirham 47.47	US $13.13	MYR 57.57
DN 100/114.3 PN 16 S=2.6 STAINLESS STEEL FLANGES Weld Neck DIN2633	SGD 27.05	UAE Dirham 70.64	US $19.54	MYR 85.67
DN50 PN16 WELDING NECK FLANGE DIN2633	SGD 91.03	UAE Dirham 237.68	US $65.74	MYR 288.25
DN20 25 X 1.6 1.4404 FLANGE DIN2633	SGD 393.26	UAE Dirham 1,026.86	US $284.02	MYR 1,245.34

DIN 2633 Flange

DIN 2633 PN10 Flange

DIN 2633 PN16 Flange

DIN 2633 PN6 Flange

DIN 2633 PN40 Flange

DIN 2633 Weld Neck Flange

Pipe O.D  d1		Nominal  Diameter	Flange Dimensions				WT.	Hub Dimensions				Bolting Dimensions			Raised Face
ISO	DIN	DN	b	D	K	h1	Kgs	s	d3	r	h2	n	d2	bolt	f	d4
–	14.0	10	14	90	60	35	0.59	1.8	25	4	6	4	14	M12	2	40
17.2	–		14	90	60	35	0.59	1.8	28	4	6	4	14	M12	2	40
–	20.0	15	14	95	65	35	0.65	2	30	4	6	4	14	M12	2	45
21.3	–		14	95	65	35	0.65	2	32	4	6	4	14	M12	2	45
–	25.0	20	16	105	75	38	0.95	2.3	38	4	6	4	14	M12	2	58
26.9	–		16	105	75	38	0.95	2.3	40	4	6	4	14	M12	2	58
–	30.0	25	16	115	85	38	1.14	2.6	42	4	6	4	14	M12	2	68
33.7	–		16	115	85	38	1.14	2.6	45	4	6	4	14	M12	2	68
–	38.0	32	16	140	100	40	1.69	2.6	52	6	6	4	18	M16	2	78
42.4	–		16	140	100	40	1.69	2.6	56	6	6	4	18	M16	2	78
–	44.5	40	16	150	110	42	1.86	2.6	60	6	7	4	18	M16	3	88
48.3	–		16	150	110	42	1.86	2.6	64	6	7	4	18	M16	3	88
–	57.0	50	18	165	125	45	2.53	2.9	72	6	8	4	18	M16	3	102
60.3	–		18	165	125	45	2.53	2.9	75	6	8	4	18	M16	3	102
76.1	76.1	65	18	185	145	45	3.08	2.9	90	6	10	4	18	M16	3	122
88.9	88.9	80	20	200	160	50	3.72	3.2	105	8	10	8	18	M16	3	138
–	108.0	100	20	220	180	52	4.71	3.6	125	8	12	8	18	M16	3	158
114.3	–		20	220	180	52	4.71	3.6	131	8	12	8	18	M16	3	158
–	133.0	125	22	250	210	55	6.4	4	150	8	12	8	18	M16	3	188
139.5	–		22	250	210	55	6.4	4	156	8	12	8	18	M16	3	188
–	159.0	150	22	285	240	55	7.8	4.5	175	10	12	8	22	M20	3	212
168.3	–		22	285	240	55	7.8	4.5	184	10	12	8	22	M20	3	212
219.1	219.1	200	24	340	295	62	11	5.9	235	10	16	12	22	M20	3	268
–	267.0	250	26	405	355	70	15.6	6.3	285	12	16	12	26	M24	3	320
273.0	–		26	405	355	70	15.6	6.3	292	12	16	12	26	M24	3	320
323.9	323.9	300	28	460	410	78	22.1	7.1	344	12	16	12	26	M24	4	378
355.6	–	350	30	520	470	82	31.3	8	390	12	16	16	26	M24	4	438
–	368.0		30	520	470	82	29.2	8	390	12	16	16	26	M24	4	438
406.4	–	400	32	580	525	85	39.5	8	445	12	16	16	30	M27	4	490
–	419.0		32	580	525	85	37.1	8	445	12	16	16	30	M27	4	490
457.0	457.0	450	34	640	585	85	44.3	8	490	12	16	20	30	M27	4	550
508	508	500	34	715	650	90	61.2	8	548	12	16	20	33	M30	4	610
610	610	600	36	840	770	95	75.4	8.8	652	12	18	20	36	M33	5	725
711	711	700	36	910	840	100	77.1	8.8	755	12	18	24	36	M33	5	795
813	813	800	38	1025	950	105	101	10	855	12	20	24	39	M36	5	900
914	914	900	40	1125	1050	110	122	10	955	12	20	28	39	M36	5	1000
1016	1016	1000	42	1255	1170	120	162	10	1058	16	22	28	42	M39	5	1115
1220	1220	1200	48	1485	1390	130	243	13	1262	16	30	32	48	M45	5	1330
1420	1420	1400	52	1685	1590	145	323	14	1465	16	30	36	48	M45	5	1530
1620	1620	1600	58	1930	1820	160	479	16	1668	16	35	40	56	M52	5	1750
1820	1820	1800	62	2130	2020	170	599	18	1870	16	35	44	56	M52	5	1950
2020	2020	2000	66	2345	2230	180	719	20	2072	16	40	48	62	M56	5	2150

Refer DIN 2633 Flange Standard and Welding Neck Flange DIN 2633 Price List

Class 150	Temperature (in F°)	Class 900	Class 300	Class 2500	Class 600	Class 400	Class 1500
285	< 100	2220	740	6170	1480	985	3705
260	200	2035	680	5655	1360	905	3395
230	300	1965	655	5450	1310	870	3270
200	400	1900	635	5280	1265	845	3170
170	500	1810	605	5025	1205	805	3015
140	600	1705	570	4730	1135	755	2840
125	650	1650	550	4575	1100	730	2745
110	700	1590	530	4425	1060	710	2655
95	750	1520	505	4230	1015	675	2535
80	800	1235	410	3430	825	550	2055
65	850	955	320	2655	640	425	1595
50	900	690	230	1915	460	305	1150
35	950	410	135	1145	275	185	685
20	1000	255	85	715	170	115	430
450	Hydrostatic Test (psig)	3350	1125	9275	2225	1500	5575

We keep ready stock of DIN 2633 Flange Material in various sizes

Pitch Circle Diameter	Suitable for welding flange	Thread holes	Pressure
75 mm	DN 20/26,9 mm	4 x 14 mm	PN 16
85 mm	DN 25/33,7 mm	4 x 14 mm	PN 16
100 mm	DN 32/42,4 mm	4 x 18 mm	PN 16
110 mm	DN 40/48,3 mm	4 x 18 mm	PN 16
125 mm	DN 50/60,3 mm	4 x 18 mm	PN 16
145 mm	DN 65/76,1 mm	4 x 18 mm	PN 16
160 mm	DN 80/88,9 mm	8 x 18 mm	PN 16
180 mm	DN 100/108 or 114,3 mm	8 x 18 mm	PN 16
210 mm	DN 125/133 or 139,7 mm	8 x 18 mm	PN 16
240 mm	DN 150/159 or 168,3 mm	8 x 22 mm	PN 16
295 mm	DN 200/219,1 mm	12 x 22 mm	PN 16
355 mm	DN 250/273 mm	12 x 26 mm	PN 16

Check DIN 2633 Pn10 Flange Dimensions and DIN 2633 Weld Neck Flanges Weight Chart

Singapore Lng Corporation Pte Ltd

ADCO - Onshore Gas Gathering & Injection For OGD3-Dubai

Qatar Petrochemical Company

Malampaya Project Phase 3 Luzon, Philippines

Tanzania LNG Liquefaction Plant-South Africa

Lake Charles Lng Liquefaction Plant-USA