DIN 2561 Flange and DIN 2561 PN10 Blind/ Socket Weld Flanges

Leading Supplier of DIN 2561 PN10 Blind Flange, Check DIN 2561 Forged Flanges Dimensions

Stockist of DIN 2561 PN10 Weld neck Flange and DIN 2561 Oval Flange with Metallographic examination and MTR

A flange is a device that can be used to efficiently connect pipes, tubes, valves, pumps, and other equipment to create a strong pipeline system. The DIN 2561 Flange is a German grade that is designed to work in high temperature and pressure conditions. These flanges possess excellent corrosion and oxidation resistance across harsh conditions. They are designed in schedules between SCH 20 to SCH 140. The DIN 2561 PN10 flange specifies pressure holding capacity in the system. These flanges roughly equate to working pressures up to 10 bar. They are commonly seen in moderate to low-pressure conditions. A DIN 2561 Oval Flange like the name suggests is designed in the shape of an oval. These flanges are designed in raised, flat, and ring-type joint faces. They can be either produced in threaded or welded configurations.

Check DIN 2561 PN16 Threaded Flanges Bolting Torque Tables, we accept small/ large orders of DIN 2561 Slip on Flange

The DIN 2561 PN10 Weld neck Flange is recognized by a long protruded hub that allows it to transfer the stress away from the pipe. These flanges are seen in high pressure and temperature setups, where repeated bending is constantly taking place. A DIN 2561 PN40 Socket Weld Flange has a socket wherein the pipe is welded with a single fillet weld. These flanges are seen in small bore pipes of NPS 2 or lower. They are used in spaces where it is difficult to install weld neck flanges. The DIN 2561 Forged Flange is alloyed with carbon and iron creating a strong structure. These flanges possess a finer grain structure and showcase excellent tensile and fatigue strength.