Inconel 625 Pipe Fittings

We are leading Alloy 625 Elbow Manufacturer in India, Refer Weight Chart and Sizes of ASTM B366 UNS N06625 Tee

Pipe fittings are devices that are utilized to influence the characteristics of the flow in the system. The Inconel 625 Pipe Fittings are austenitic alloys designed with a chemical content of chromium, nickel, molybdenum niobium, and other alloys. Inconel 625 Fittings are used in connecting piping grades of different specifications. These fittings have higher resistance to corrosion in different conditions. The Alloy 625 Fittings possess superior strength and can be readily welded in place following standard shop welding processes. ASTM B366 UNS N06625 Fittings are quality components that can be customized as per requirements.

The Inconel 2.4856 Elbow is one of the common grades of fittings that are utilized to change the direction of the flow in the system. These elbows are available in long or short radius elbows. Nickel Alloy Inconel 625 Long Radius Elbow has a radius of curvature which is 1.5 times the outer diameter of the pipe. These elbows are seen in high-pressure applications. The Alloy 625 Short Radius Elbow has a radius of curvature which is exactly equal to the outer diameter of the pipe equipment. These elbows are utilized to resist wear and tear in the system. The ASTM B366 Inconel 625 Tee is a device that is designed in the shape of a T having three outlets. These tees can be availed in equal and reducing configurations. ASME SB 366 UNS N06625 Lateral Tee is a unique grade that is similar to a tee, but these tees possess a 45 degrees branch from the pipeline. The versatile Inconel Alloy 625 Concentric Reducer is employed in connecting piping sections on the same axial place. The cone-shaped reducer connects piping grades of unequal sizes. An Inco 625 Buttweld Cap is allowed to terminate the flow in the system. These caps protect piping grade against corrosive affluents and damage during movement or storage. The Nickel Alloy 625 Stub End is a short piece of a pipe that is flared across one of its ends and is square cut on the other side. The robust UNS N06625 Return Bends are U-shaped grades that allow a 180-degree change in the direction of the flow.

Call us to get latest price list of Nickel 625 Concentric/ Eccentric Reducer, We supply Inconel 625 Buttweld Fittings in more than 20 countries

Specifications	ASTM/ ASME B366 / SB366
Standards/th>	MSS-SP-43, ASME/ANSI B16.9, B16.28
Type	Fabricated / Seamless / Welded
Size	Welded Butt Weld Fittings: 1/2″upto 48″and Seamless Butt Weld Fittings: 1/2″upto 10″
Thickness	Schedule 5s to XXS available with NACE MR 01-75

10-12% price difference if you buy directly from Alloy 625 Fittings manufacturers

Description	Price Per Kg In Singapore	Price Per Kg In UAE	Price Per Kg In USD	Price Per Kg In Malaysia
NPTM 3/4 IN 3000-6000 NICKEL ALLOY FITTINGS:PLUG HEX HEAD INCONEL 625 ANSI B16.11 FITTINGS	SGD 26.64	UAE Dirham 69.56	US $19.24	MYR 84.36
1 SCH 80 3000# FITTINGS SOCKOLET INCONEL 625 FITTINGS	SGD 115.74	UAE Dirham 302.21	US $83.59	MYR 366.51
8 NB X 6 NB SCH 80 INCONEL ALLOY 625 SEAMLESS BW FITTING ASTM B366 GRADE 2 UNS N06625 ANSI B16.9 NACE MR0103, CONCENTR FITTINGS	SGD 3,494.00	UAE Dirham 9,123.22	US $2,523.44	MYR 11,064.33
NPT3/4IN 3000 NICKEL ALLOY FITTINGS HALF COUPLING INCONEL 625 ANSI B 16.11	SGD 50.62	UAE Dirham 132.16	US $36.56	MYR 160.28
33.4 MM OD X 3 MM THK INCONEL 625 SMLS LR ELBOW 90 DEG TO ASTM B 366 GR. UNS NO. 6625 GR 2, DIMN B 16.9 BW FITTINGS	SGD 130.19	UAE Dirham 339.95	US $94.03	MYR 412.28
1 X SCH 80X 45 DEG INCONEL PIPE FITTINGS BW ELBOW UNS N06625 FITTINGS	SGD 13.23	UAE Dirham 34.55	US $9.56	MYR 41.90
6 X 4 SCH-120 PIPE FITTINGS TEE, CON.REDUCER, SEAMLESS INCONEL 625 FITTINGS	SGD 1,132.88	UAE Dirham 2,958.09	US $818.19	MYR 3,587.47

Inconel 625 Eccentric Reducer

ASME B16.9 Inconel 625 180 Degree Elbows

Alloy 625 Elbow

Inconel Dn 2.4856 End Cap

Alloy 625 Lap Joint Stub Ends

ASTM B366 N06625 Inconel Cross Fitting

Inconel 625 Pipe Fittings

Werkstoff Nr. 2.4856 Reducer

Inconel Alloy UNS N06625 Tee

625 Inconel 45 Degree Elbows

Nickel Alloy 625 90 Degree Elbows

Inconel 2.4856 Return Bends

ASTM B366 Inconel 625 Cross Tee

Inco 625 Laterals

Inconel Alloy 625 Weld Elbows

ASME SB 366 UNS N06625 Reducing Tee

Nickel Alloy Inconel 625 Concentric Reducer

Inconel UNS N06625 Stub End

Inconel 625 Hexagon Plugs

ASME B16.9 Inconel 625 Threaded Elbow

Alloy 625 Threaded Tee

Inconel Dn 2.4856 Square Plugs

Alloy 625 Hexagon Bushing

ASTM B366 N06625 Inconel Socket Weld Tee

Nickel Alloy 625 Socket Weld Caps

Werkstoff Nr. 2.4856 Threaded Caps

Inconel Alloy 625 Socket Weld Cross

625 Inconel Socket Weld Union

Nickel Alloy 625 Socket Weld Elbow

Inconel 2.4856 Threaded Coupling

ASTM B366 Inconel 625 Socket Weld Lateral Tee

Inco 625 Socket Weld Coupling

Inconel Alloy 625 Threaded Union

ASME SB 366 UNS N06625 Threaded Cross

Nickel Alloy Inconel 625 Threaded Bends

Inconel UNS N06625 Nipple Outlets

Inconel 625 Threaded Outlets

ASTM B366 UNS N06625 Welding Outlets

UNS N06625 Inconel 625 Socket Weld Outlets

Inconel 625 Swept Outlets

ASTM B366 UNS N06625 Lateral Outlets

UNS N06625 Inconel 625 Elbow Outlets

Inconel 625 Fittings manufacturer in India, we use only high quality & tested material to produce Nickel Alloy 625 Buttweld Fittings

PIPE NOMINAL SIZE	OUTSIDE DIAM.		90° ELBOW		45° ELBOW		180° RETURNS
(inches)			Short Radius	Long Radius	Long Radius		Long Radius
	(mm)	(inches)	Center to Face (inches)	Center to Face (inches)	Radius (inches)	Center to Face (inches)	Back to face (inches)	Center to Center (inches)
3/4	26.7	1.050	–	1 1/8		7/16	1 11/16	2 1/4
1/2	21.3	0.840	–	1 1/2		5/8	1 7/8	2
1	33.4	1.315	1	1 1/2		7/8	2 3/16	3
1 1/2	48.3	1.900	1 1/2	2 1/4	3	1 1/8	3 1/4	4 1/2
1 1/4	42.2	1.660	1 1/4	1 7/8		1	2 3/4	3 3/4
2	60.3	2.375	2	3	4	1 3/8	4 3/16	6
3	88.9	3.500	3	4 1/2	6	2	6 1/4	9
2 1/2	73.0	2.875	2 1/2	3 3/4	5	1 3/4	5 3/16	7 1/2
3 1/2	101.6	4.000	3 1/2	5 1/4	7	2 1/4	7 1/4	10 1/2
5	141.3	5.563	5	7 1/2	10	3 1/8	10 5/16	15
4	114.3	4.500	4	6	8	2 1/2	8 1/4	12
6	168.3	6.625	6	9	12	3 3/4	12 5/16	18
10	273.1	10.750	10	15	15	6 1/4	20 3/8	30
8	219.1	8.625	8	12	12	5	16 5/16	24
12	323.9	12.750	12	18	18	7 1/2	24 3/8	36

Nominal size		OD	Elbows			Reducer	Caps	Returns				Stubs Ends
			Short	Long				Long		Short		Long	Short	Radius of fillet	Diam. of Lap
			90 deg	90 deg	45 deg
DN	NPS	D	A	A	B	H	E	O	K	O	K	F	F	R	G
20	¾	26.7		38	19	38	25	76	51			76	51	3	43
32	11/4	42.2	32	48	25	51	38	95	70	64	52	102	51	5	64
40	11/2	48.3	38	57	29	64	38	114	83	76	62	102	51	6	73
50	2	60.3	51	76	35	76	38	152	106	102	81	152	64	8	92
65	21/2	73.0	64	95	44	89	38	190	132	127	100	152	64	8	106
80	3	88.9	76	114	51	89	51	229	159	152	121	152	64	10	127
90	31/2	101.6	89	133	57	102	64	267	184	178	140	152	76	10	140
15	½	21.3		38	16		25	76	48			76	51	3	35
100	4	114.3	102	152	64	102	64	305	210	203	159	152	76	11	157
200	8	219.1	203	305	127	152	102	610	414	406	313	203	102	13	270
250	10	273.0	254	381	159	178	127	762	518	508	391	254	127	13	324
300	12	323.8	305	457	190	203	152	914	619	610	467	254	152	13	381
350	14	355.6	356	533	222	330	165	1067	711	711	533	305	152	13	413
125	5	141.3	127	190	79	127	76	381	262	254	197	203	76	11	185
400	16	406.4	406	610	254	356	178	1219	813	813	610	305	152	13	470
25	1	33.4	25	38	22	51	38	76	56	51	41	102	51	3	51
450	18	457	457	686	286	381	203	1372	914	914	686	305	152	13	533
500	20	508	508	762	318	508	229	1524	1016	1016	762	305	152	13	584
1050	42	1067		1600	660	610	305
550	22	559	559	838	343	508	254	1676	1118	1118	838	305	152	13	641
150	6	168.3	152	229	95	140	89	457	313	305	237	203	89	13	218
600	24	610	610	914	381	508	267	1829	1219	1219	914	305	152	13	692
650	26	660		991	405	610	267
700	28	711		1067	438	610	267
750	30	762		1143	470	610	267
1100	44	1118		1676	695	610	343
800	32	813		1219	502	610	267
850	34	864		1295	533	610	267
900	36	914		1372	565	610	267
950	38	965		1448	600	610	305
1200	48	1219		1829	759	711	343
1000	40	1016		1524	632	610	305
1150	46	1168		1753	727	711	343

Threaded Fittings

Size Product		3/4”	1/4”	1/8”	3/8”	1/2”	1”	2-1/2”	1-1/2”	3”	1-1/4”	2”	4”
90 Elbow	2000	0.35	0.08	0.10	0.13	0.25	0.53	3.14	1.06	4.81	0.82	1.70	10.21
	3000	0.69	0.14	0.10	0.29	0.43	1.14	5.99	2.63	8.88	1.42	2.92	14.85
	6000	1.31	0.33	0.17	0.45	0.80	1.61	9.88	3.79	17.73	2.93	7.31	15.76
45 Elbow	2000	0.27	0.08	0.09	0.10	0.20	0.41	3.46	0.82	5.44	0.68	1.41	8.96
	3000	0.56	0.12	0.09	0.24	0.34	0.94	3.71	2.05	5.97	1.03	2.23	8.96
	6000	1.07	0.27	0.11	0.39	0.63	1.27	7.01	2.54	14.16	2.24	4.37	11.36
Tee	2000	0.43	0.12	0.13	0.17	0.31	0.69	4.11	1.39	6.12	1.07	2.16	14.74
	3000	0.92	0.20	0.13	0.38	0.56	1.49	6.99	3.27	10.19	1.76	3.53	19.13
	6000	1.65	0.45	0.20	0.63	0.98	2.17	13.11	4.71	21.70	3.74	7.88	18.53
Cross	2000	0.54	0.14	0.17	0.21	0.39	0.83	5.26	1.75	7.58	1.26	2.65	16.35
	3000	1.06	0.26	0.17	0.44	0.72	1.79	8.51	3.93	12.45	2.13	4.27	21.93
Full Coupling	3000	0.19	0.04	0.05	0.06	0.13	0.45	2.29	1.07	3.38	0.81	1.40	6.28
	6000	0.50	0.13	0.08	0.20	0.34	0.87	4.20	1.94	6.10	1.09	2.87	10.04
Half Coupling	3000	0.10	0.02	0.02	0.03	0.06	0.23	1.13	0.54	1.68	0.34	0.70	3.11

Socket Weld Fittings

Size Product		1-1/2”	3/8”	1/4”	1/2”	3”	1”	2-1/2”	1/8”	1-1/4”	2”	3/4”	4”
90 Elbow	3000	1.08	0.12	0.08	0.22	5.38	0.53	3.20	0.09	0.84	1.68	0.33	10.95
	6000	2.79	0.29	0.15	0.40		1.17		0.10	1.48	3.28	0.73
45 Elbow	3000	0.80	0.11	0.07	0.20	5.10	0.42	2.53	0.08	0.69	1.35	0.28	9.41
	6000	2.01	0.26	0.14	0.36		0.92		0.09	1.11	2.09	0.57
Tee	3000	1.35	0.15	0.09	0.29	5.90	0.65	3.98	0.13	1.04	2.04	0.42	13.92
	6000	3.37	0.43	0.20	0.56		1.49		0.14	1.93	3.95	0.94
Cross	3000	1.58	0.20	0.13	0.35	6.69	0.73	4.37	0.16	1.12	2.25	0.47	14.58
	6000	3.96	0.45	0.26	0.67		1.75		0.17	2.26	4.42	1.07
Full Coupling	3000	0.59	0.07	0.05	0.13	1.78	0.29	1.40	0.04	0.45	0.86	0.17	2.85
	6000	1.11	0.114	0.07	0.204		0.44		0.05	0.60	1.62	0.27
Half Coupling	3000	0.66	0.07	0.05	0.13	2.10	0.30	1.63	0.04	0.34	1.09	0.21	3.71
	6000	1.25	0.12	0.09	0.21		0.51		0.06	0.75	1.92	0.31
Red Coupling	3000	0.59	0.07	0.05	0.13	1.88	0.27	1.42	0.04	0.49	0.97	0.19	3.31
	6000	1.20			0.24		0.65			0.75	2.12	0.33
Cap	3000	0.59	0.07	0.04	0.10	2.74	0.25	1.43	0.03	0.45	0.96	0.16	4.24
	6000	0.94	0.10	0.08	0.16		0.36		0.05	0.64	1.41	0.23
Union	3000	1.61	0.25	0.28	0.35	5.15	0.81	3.50	0.28	1.10	2.16	0.49	11.59

View Weight Chart of ASTM B366 UNS N06625 End Cap, We Supply Alloy 625 Seamless Fittings with Hydro Test certificate

A leading supplier of industrial Nickel Alloy 625 Forged Fittings, we offer a wide range of cost effective Inconel 625 Pipe Fittings

Curie Temperature		Melting Range		Density		Permeability at 200 Oersted	Specific Heat
°F	°C	°C	°F	lb/cu in	gram/cc	15.9 kA/m	Btu/lb°F (J/kg°C) 70°F(21°C)
<-320	-196	1290-1350	2350-2460	0.305	8.44	1.0006	0.098(410)

Cu	Ni	Mn	S	Si	Cr	C	Fe
–	58.0 min	0.50 max	0.015max	0.50 max	20.0 – 23.0	0.10max	5.0 max

Melting Point	(0.2%Offset) Yield Properties	Tensile Properties	Density	Elongation
(2460 °F)1350 °C	MPa – 517, Psi – 75,000	MPa – 930, Psi – 1,35,000	8.4 g/cm3	42.5 %

EN	UNS	AFNOR	JIS	BS	WERKSTOFF NR.	GOST
NiCr22Mo9Nb	N06625	NC22DNB4M	NCF 625	NA 21	2.4856	ХН75МБТЮ

Leading DIN 2.4856 Long/ Short Radius Elbow Manufacturer in India, Check latest stock list of Inconel 625 Pipe Fittings

We are a specialist distributor & supplier of Inconel Alloy 625 Fittings and Inconel 625 Buttweld Pipe Fittings

Temperature Ratings		Pressure Class
		150	300
			1 1/4 - 2 Inches	1/4 - 1 Inches	2 1/2 - 3 Inches
(oC)	(oF)
-29 to 66	-20 to 150	300	1500	2000	1000
93	200	265	1350	1785	910
121	250	225	1200	1575	825
149	300	185	1050	1360	735
177	350	150	900	1150	650
204	400	-	750	935	560
232	450	-	600	725	475
260	500	-	450	510	385
288	550	-	300	300	300

DN	Schedule 10S			Schedule 40S
	Ecc reducer	Con reducer	Reducing tee	Con reducer	Reducing tee	Ecc reducer
400x300	18.35	18.35	51.71	36.70	87.54	36.70
25x15	0.12	0.12	0.25	0.15	0.26	0.15
20x15	0.10	0.10	0.11	0.14	0.15	0.14
25x20	0.13	0.13	0.25	0.16	0.27	0.16
32x25	0.18	0.18	0.45	0.22	0.53	0.22
32x20	0.18	0.18	0.44	0.22	0.52	0.22
40x20	0.18	0.18	0.58	0.24	0.74	0.24
40x32	0.24	0.21	0.61	0.28	0.77	0.28
40x25	0.19	0.19	0.60	0.26	0.76	0.26
50x25	0.28	0.28	0.73	0.40	1.10	0.40
50x40	0.31	0.31	0.76	0.45	1.15	0.45
50x32	0.30	0.30	0.74	0.44	1.13	0.44
65x40	0.44	0.44	1.24	0.76	1.94	0.76
80x40	0.51	0.51	1.52	0.94	2.85	0.94
65x50	0.47	0.47	1.25	0.80	1.98	0.80
80x50	0.55	0.55	1.56	1.00	2.91	1.00
100x40	0.68	0.68	2.90	1.36	4.53	1.36
80x65	0.59	0.59	1.59	1.08	2.98	1.08
100x50	0.78	0.78	2.94	1.57	4.48	1.57
100x80	0.87	0.87	3.04	1.74	4.64	1.74
100x65	0.83	0.83	2.97	1.66	4.54	1.66
125x100	1.49	1.49	5.49	2.98	8.47	2.98
150x100	1.96	1.96	7.10	4.07	9.68	4.07
150x80	1.82	1.82	6.86	3.98	11.94	3.98
150x125	2.00	2.00	7.27	4.07	9.99	4.07
200x150	3.19	3.19	14.08	6.94	18.82	6.94
250x100	4.73	4.73	22.75	10.52	30.07	10.52
200x100	3.01	3.01	13.46	6.55	17.98	6.55
250x150	5.00	5.00	23.55	11.12	31.13	11.12
300x200	7.67	7.67	34.73	15.98	54.43	15.98
250x200	5.20	5.20	24.08	11.56	31.84	11.56
300x250	7.98	7.98	35.52	16.63	55.79	16.63
400x200	16.70	16.70	49.90	33.40	84.82	33.40
350x300	15.29	15.29	43.96	30.58	71.21	30.58
400x250	17.22	17.22	50.80	35.43	85.73	35.43

We stock and export Inconel Alloy 625 Stub End and ASME SB 366 UNS N06625 Lateral Tee in size range of 1/2 inch to 48 inch

DN	Schedule 10S					Schedule 40S
	45° Elbow	90° Elbow	Equal tee	Stub end type (B)	End cap	45° Elbow	90° Elbow	Equal tee	End cap	Stub end type (B)
15	0.03	0.06	0.09	0.07	0.03	0.04	0.08	0.10	0.04	0.08
20	0.03	0.07	0.13	0.09	0.05	0.04	0.08	0.17	0.07	0.11
25	0.08	0.14	0.28	0.16	0.08	0.11	0.15	0.29	0.10	0.17
32	0.11	0.23	0.49	0.22	0.10	0.17	0.26	0.59	0.18	0.25
40	0.17	0.30	0.68	0.25	0.11	0.23	0.40	0.86	0.20	0.31
50	0.25	0.50	0.85	0.43	0.13	0.40	0.70	1.28	0.23	0.61
65	0.48	0.85	1.41	0.57	0.19	0.77	1.40	2.19	0.27	0.80
80	0.63	1.25	1.77	0.72	0.25	1.08	2.20	3.31	0.42	1.13
100	1.08	2.10	3.46	1.09	0.68	1.47	4.47	5.27	1.14	1.87
125	1.82	3.65	5.44	1.47	1.11	2.84	6.80	9.63	2.13	2.79
150	2.72	5.45	8.03	2.15	1.42	5.44	10.89	10.99	3.23	3.57
200	5.33	10.20	15.65	3.22	2.38	10.77	21.54	20.91	5.19	6.07
250	9.75	18.15	26.76	5.13	4.45	19.27	38.56	35.38	9.00	10.07
300	13.62	25.80	39.46	8.16	7.50	29.71	59.42	62.14	15.00	14.29
350	18.37	36.29	48.53	10.88	8.17	35.15	79.38	79.31	16.00	17.14
400	23.81	47.63	58.97	12.70	10.67	45.81	99.79	99.79	21.00	20.41
450	29.94	59.87	79.65	17.23	13.00	59.40	129.73	129.73	26.00	27.21
500	49.90	99.80	103.42	21.77	17.00	74.84	162.38	162.39	34.00	29.94
600	70.31	140.61	155.58	27.21	26.00	105.23	225.89	225.90	52.00	38.55

Why don't you directly contact a Inconel 625 Forged Fittings manufacturer in India? We produce as per your drawing, check online inventory of ASME B16.9 inconel 625 pipe fittings and Inconel 625 Buttweld Fittings

Center to End Elbow, Tee, Cross A			DN	Band O.D. H			Center to End 45° Elbow C			Minimum W.T. G			Nom. Pipe Size	Thread Length Min. (1)
2000	3000	6000		2000	3000	6000	2000	3000	6000	2000	3000	6000		B	L2
21	21	25	6	22	22	25	17	17	19	3.18	3.18	6.35	1/8”	6.4	6.7
21	25	28	8	22	25	33	17	19	22	3.18	3.30	6.60	1/4”	8.1	10.2
25	28	33	10	25	33	38	19	22	25	3.18	3.51	6.98	3/8”	9.1	10.4
28	33	38	15	33	38	46	22	25	28	3.18	4.09	8.15	1/2”	10.9	13.6
33	38	44	20	38	46	56	25	28	33	3.18	4.32	8.53	3/4”	12.7	13.9
38	44	51	25	46	56	62	28	33	35	3.68	4.98	9.93	1”	14.7	17.3
44	51	60	32	56	62	75	33	35	43	3.89	5.28	10.59	1-1/4”	17.0	18.0
51	60	64	40	62	75	84	35	43	44	4.01	5.56	11.07	1-1/2”	17.8	18.4
60	64	83	50	75	84	102	43	44	52	4.27	7.14	12.09	2”	19.0	19.2
76	83	95	65	92	102	121	52	52	64	5.61	7.65	15.29	2-1/2”	23.6	28.9
86	95	106	80	109	121	146	64	64	79	5.99	8.84	16.64	3”	25.9	30.5
106	114	114	100	146	152	152	79	79	79	6.55	11.18	18.67	4”	27.7	33.0

O.D. (mm)	Nominal Pipe Size		W.T. (mm)
			Sch 5S		Sch 10S		Sch 40S		Sch 80S
	NPS	DN	Weight (kg/m)	WT (mm)	Weight (kg/m)	WT (mm)	Weight (kg/m)	WT (mm)	Weight (kg/m)	WT (mm)
10.3	⅛	6			0.28	1.24	0.37	1.73	0.47	2.41
13.7	¼	8			0.49	1.65	0.63	2.24	0.80	3.02
17.1	⅜	10			0.63	1.65	0.84	2.31	1.10	3.20
21.3	½	15	0.80	1.65	1.00	2.11	1.27	2.77	1.62	3.73
26.7	¾	20	1.02	1.65	1.28	2.11	1.69	2.87	2.20	3.91
33.4	1	25	1.29	1.65	2.09	2.77	2.50	3.38	3.24	4.55
42.2	1¼	32	1.65	1.65	2.69	2.77	3.39	3.56	4.47	4.85
48.3	1½	40	1.90	1.65	3.11	2.77	4.05	3.68	5.41	5.08
60.3	2	50	2.39	1.65	3.93	2.77	5.44	3.91	7.48	5.54
73.0	2½	65	3.69	2.11	5.26	3.05	8.63	5.16	11.41	7.01
88.9	3	80	4.52	2.11	6.46	3.05	11.29	5.49	15.27	7.62
101.6	3½	90	5.18	2.11	7.41	3.05	13.57	5.74	18.64	8.08
114.3	4	100	5.84	2.11	8.37	3.05	16.08	6.02	22.32	8.56
141.3	5	125	9.46	2.77	11.56	3.40	21.77	6.55	30.97	9.53
168.3	6	150	11.31	2.77	13.83	3.40	28.26	7.11	42.56	10.97
219.1	8	200	14.78	2.77	19.97	3.76	42.55	8.18	64.64	12.70
273.1	10	250	22.61	3.40	27.79	4.19	60.31	9.27	81.56	12.70
323.9	12	300	31.25	3.96	35.99	4.57	73.88	9.53	97.47	12.70
355.6	14	350	34.34	3.96	41.36	4.78	81.33	9.53	107.40	12.70
406.4	16	400	41.56	4.19	47.34	4.78	93.27	9.53	123.31	12.70
457	18	450	46.79	4.19	53.31	4.78	105.17	9.53	139.16	12.70
508	20	500	59.32	4.78	68.65	5.54	117.15	9.53	155.13	12.70
559	22	550	65.33	4.78	75.62	5.54
610	24	600	82.58	5.54	94.53	6.35	141.12	9.53	187.07	12.70
660	26	650
711	28	700
762	30	750	118.34	6.35	147.29	7.92

W (Min)	F (Min)	E (Min)	Nominal Pipe Size		b		A (Min)	C (Min)
			Inch	DN	3000	6000
26	-	10	1/8”	6	5	2	11	6
36	-	15	1/4”	8	8	6	15	6
31	10	15	1/4”x1/8”	8 x 6	5	2	15	6
40	-	16	3/8”	10	11	8	18	8
39	15	16	3/8”x1/4”	10 x 8	8	6	18	8
48	-	20	1/2”	15	14	11	22	8
44	16	20	1/2”x3/8”	15 x 10	11	8	22	8
43	15	20	1/2”x1/4”	15 x 8	8	6	22	8
52	-	21	3/4”	20	19	13	27	10
50	20	21	3/4”x1/2”	20 x 15	14	11	27	9
46	16	21	3/4”x3/8”	20 x 10	11	8	27	9
60	-	25	1”	25	24	17	35	10
56	21	25	1”x3/4”	25 x 20	19	13	35	10
55	20	25	1”x1/2”	25 x 15	14	11	35	10
68	-	26	1-1/2”	40	38	30	50	16
67	25	26	1-1/2”x1”	40 x 25	24	17	50	16
63	21	26	1-1/2”x3/4”	40 x 20	19	13	50	16
62	20	26	1-1/2”x1/2”	40 x 15	14	11	50	16
71	-	27	2”	50	49	39	62	17
70	26	27	2”x1-1/2”	50 x 40	38	30	62	17
70	25	27	2”x1”	50 x 25	24	17	62	18
65	21	27	2”x3/4”	50 x 20	19	13	62	17
65	20	27	2”x1/2”	50 x 15	14	11	62	18

3000LB

A	G (2) (Min)	Nom. Pipe Size	DN	B (2)		D (1)	B (2)	E	J (2) (Min)
				(Min)	(Avg)
35	3.75	1/2”	15	4.09	4.67	15.8	21.8	9	9.5
41	3.95	3/4”	20	4.27	4.90	21.0	27.2	9	12.5
51	4.55	1”	25	4.98	5.69	26.7	33.9	12	12.5
59	4.85	1-1/4”	32	5.28	6.07	35.1	42.7	17	12.5
68	5.10	1-1/2”	40	5.54	6.35	40.9	48.8	21	12.5
95	5.55	2”	50	6.04	6.93	52.5	61.2	24	16.0
118	7.05	2-1/2”	65	7.67	8.76	62.7	73.9	38	16.0

6000LB

G (2) (Min)	Nom. Pipe Size	E	B (2)		D (2)	A	DN	B (2)	J (2) (Min)
			(Avg)	(Min)
4.78	1/2”	9	5.97	5.18	11.8	41	15	21.8	9.5
5.56	3/4”	12	6.96	6.04	15.6	51	20	27.2	12.5
6.35	1”	17	7.92	6.93	20.7	59	25	33.9	12.5
6.35	1-1/4”	21	7.92	6.93	29.5	68	32	42.7	12.5
7.14	1-1/2”	24	8.92	7.80	34.0	95	40	48.8	12.5
8.74	2”	31	10.92	9.50	42.9	106	50	61.2	16.0

Body Wall Thickness G			DN	Depth of Socket Min. J	Center to Bottom of Socket-A						Socket Bore Dia. B	Bore Dia. Of Fitting D			Nom. Pipe Size	Socket Wall Thickness (2) C
Class Designation					90° Elbows Tees, Crosses			45° Elbows								Class Designation
6000	3000	9000			Class Designation			Class Designation				Class Designation				3000		6000		9000
Min.	Min.	Min.			6000	3000	9000	9000	3000	6000		3000	9000	6000		Min	Ave.	Min	Ave.	Ave.	Min
3.15	2.41		6	9.5	11.0	11.0			8.0	8.0	10.8	6.9		4.0	1/8”	3.18	3.18	3.43	3.96
3.68	3.02		8	9.5	13.5	11.0			8.0	8.0	14.2	9.3		6.4	1/4”	3.30	3.78	4.01	4.60
4.01	3.20		10	9.5	15.5	13.5			8.0	11.0	17.6	12.6		9.2	3/8”	3.50	4.01	4.37	5.03
4.78	3.73	7.47	15	9.5	19.0	15.5	25.5	15.5	11.0	12.5	21.8	15.8	6.4	11.8	1/2”	4.09	4.67	5.18	5.97	9.35	8.18
5.56	3.91	7.82	20	12.5	22.5	19.0	28.5	19.0	13.0	14.0	27.2	21.0	11.1	15.6	3/4”	4.27	4.90	6.04	6.96	9.78	8.56
6.35	4.55	9.09	25	12.5	27.0	22.5	32.0	20.5	14.0	17.5	33.9	26.7	15.2	20.7	1”	4.98	5.69	6.93	7.92	11.38	9.96
6.35	4.85	9.70	32	12.5	32.0	27.0	35.0	22.5	17.5	20.5	42.7	35.1	22.8	29.5	1-1/4”	5.28	6.07	6.93	7.92	12.14	10.62
7.14	5.08	10.15	40	12.5	38.0	32.0	38.0	25.5	20.5	25.5	48.8	40.9	28.0	34.0	1-1/2”	5.54	6.35	7.80	8.92	12.70	11.12
8.74	5.54	11.07	50	16.0	41.0	38.0	54.0	28.5	25.5	28.5	61.2	52.5	38.2	42.9	2”	6.04	6.93	9.50	10.92	13.84	12.12
	7.01		65	16.0		41.0			28.5		73.9	62.7			2-1/2”	7.67	8.76
	7.62		80	16.0		57.0			32.0		89.8	78.0			3”	8.30	9.52
	8.56		100	19.0		66.5			41.0		115.2	102.3			4”	9.35	10.69

Why pay extra? Buying from Inconel 625 Dn 2.4856 Welded Buttweld Fittings manufacturers saves your cost, wide selection of Din 2.4856 Welded Buttweld Fittings and Alloy 625 Buttweld Elbow in India

• Heat Treatment

• Pickling, Polish

• Rolling

• Cutting

• Bending

• Forging

• Cladding

Weatherford - Cielo Abu Dhabi

Adco Jebel Dhanna Crude Storage Tanks

Gorgon LNG Train 4-Australia

Bahrain Deep Gas Exploration Project Bahrain

ConocoPhillips Barossa Project-Australia

Singapore Lng Corporation Pte Ltd