The fittings of the P235gh grade are specified for pressure vessels, boiler, and heat exchanger applications. The P235gh fittings help in changing the direction, joining dissimilar pipes, and branch connection of different equipment. These fittings play an important role in influencing the characteristics of the fluid and gaseous flow in the system. The Acier P235gh Buttweld Fittings are easy to install and have good resistance to corrosive media due to the superior chemical content of chromium, nickel, and molybdenum with other stabilizing agents. They are commonly seen in refineries and the oil and gas industry. The Stal P235gh Weld Fittings are manufactured following all international and national standards, making them a reliable choice in torrid conditions. These fittings have a density of 7.85 g/cm3 and can be availed in customized sizes and shapes as per customer demands. The P235gh Material is designed with a thickness above 16mm to 250mm. They have minimum yield strength of 235mpa with a tensile strength between 360 to 480mpa. They can be easily elongated by 24% in the system.
The Stahl P235gh tc1 Elbow is used to efficiently change the direction of the flow between two pipes. These elbows are generally produced in 22.5, 45, and 90 degree specifications. An Acier P235gh Stub End has a short piece of pipe that is flared on one side with a square cut on the other. These flanges can be used in conjunction with another backing flange or used as an alternative to a standard flange. The P235gh tc1 Reducer is a fitting that is employed to join dissimilar piping equipment together. The reducer can be availed in either eccentric or concentric specification. A Carbon Steel P235gh End Cap is used to close the ends of the piping system. The cap help prevent environmental contamination and effectively seals it from harsh constituents.
Carbon Steel P235gh Reducing Tee
P235GH tc1 180 Degree Elbows
Din P235GH Stub End
En 10216-2 P235GH 45 Degree Elbows
P235gh Tc2 Cross Fitting
En 10216-2 P235gh Tc1 90 Degree Elbows
Stal P235GH Laterals
P235GH Elbow
Acier P235GH Cross Tee
Steel p235GH Fittings
Stahl p235GH tc1 Concentric Reducer
Acier p235GH Equal Tee
CS EN 10253-2 P235GH End Cap
Carbon Steel EN 10253-1 P235GH Eccentric Reducer
ANSI B16.9 P235GH Carbon Steel Lap Joint Stub Ends
CS P235GH Reducer
Carbon Steel P235GH Weld Elbows
ANSI B16.9 P235GH Return Bends