ASME B16.9 Elbow

Leading Supplier of Stainless Steel 90 Degree Elbow in ASME B16.9 Standard, Check Price list of Carbon steel Long Radius Elbows

What is ASME B16.9 Elbow?
The ASME B16.9 elbows is formed of forged or cast material that helps in changing the direction of the flow between two piping equipment. These elbows are produced in standard sizes of 1/2 NPS to 48 NPS. These elbows can be either threaded or welded in place following standard procedures. They are designed at different angles and are available in a short or long radius of curvature.

ASME B16.9 Long Radius Elbow vs Short Radius Elbow
ASME B16.9 grade elbows are divided into long or short radius elbows based on their radius of curvature. They both have different characteristics and features.

• ASME B16.9 Long Radius Elbows has an outer diameter that is 1.5 times the radius of curvature. A short radius has a similar radius of curvature to the outer diameter.
• A short radius elbows fits well in tight areas, while the latter is preferred in normal working conditions.
• A long radius elbows offers better durability compared to a short radius elbows.

AWWA Mitered Elbow vs 90 Degree Street Elbows

• A 90 Degree Street Elbows is a fitting that joins a piece of a pipe to another fitting at a 90degree angle. 
• AWWA Mitered Elbow is a joint that is produced by bevelling two pieces and joining them at an angle of 45 degrees, and subsequently cornering them at a 90 degree angle. 

30 Degree Pipe Elbow vs 60 Degree Elbows

Elbows can change the direction of the flow in different conditions. The 30 and 60 degree elbows are less common in the industry, due to their unique design.A 30 degree pipe elbow is used to change the direction of the flow by 30 degrees. A 60 degree elbows can change the direction of fluids and gaseous media by 60 degrees.

45 Degree Stainless Steel elbow vs 90 Degree Carbon Steel elbows
45 and 90 degree elbows are the common grades of elbows that allow for swift movement of flow in the system.

• 45 Degree Stainless Steel elbows changes the direction of the flow by 45 degrees. 90 Degree Carbon Steel elbows can change the direction of media by 90 degrees.
• The 45 degree elbows has less friction and possess a lower pressure drop compared to a 90 degree elbows.
• Stainless steel elbows have a higher content of chromium giving them good resistance to corrosion and rust. The higher content of carbon in the carbon steel elbows makes them susceptible to corrosion in harsh conditions.
• 45 degree stainless steel elbows is more asthetically appealing as compared to a 90 degree carbon steel elbows.
• A carbon steel elbows is stronger and more durable compared to a stainless steel elbow.

Worldwide supplier of Alloy Steel 30 degree pipe elbow at factory price, Leading stockist of Copper Elbow

Specifications	ASME B16.9 Elbow
Pipe Elbow	ASME B16.47, ASME B16.9, ASME B16.38, ANSI B16.28, MSS-SP-43, BS, ISO, GB, DIN, MSS SP-75 DIN2605, ASME B16.25, JISB2311, JISB2313, JISB2312, BS4504, BS1560, BS4504, BS10
Types	SMLS / Welded Fitting / ERW / BW / Fabricated Fittings
Manufacturers Process	Press, Push, forge, Marking, Cast, Packing In Boxes For Sale
Bending Radius	Radius=8D, 2D, 6D, 3D, 1D, 5D, 10D
Standard Size	SLMS BW Pipe Fittings To 1/2″ – 10″ Weld BW Pipe Fitting To 1/2″ – 48″
Industries For Use	Petrochemical Industry Nuclear Power Plant Oil And Gas Industry
Thickness	Schedule 10 to Schedule 140
Mills And Origin	USA, Russian, Indian, Japanese

Price of reseller is always higher compared to ASME B16.9 Elbow manufacturers

Description	Price Per Kg In Singapore	Price Per Kg In UAE	Price Per Kg In USD	Price Per Kg In Malaysia
6SCH 40 SEAMLESS/BUTT WELDED STEEL PIPE FITTINGS MADE FROM SEAMLESS.ERW TUBES/PIPES- ELBOW 90 DEG BW ASME B16.9 LR SML	SGD 1.69	UAE Dirham 4.42	US $1.22	MYR 5.36
1 ELBOW, 45 DEGREE, SCH.10S, LR, SEAMLESS, BW, ASME B16.9, ASTM A815 CLASS WP-S UNS S32205, FERRITIC/ AUSTENITIC	SGD 12.08	UAE Dirham 31.54	US $8.72	MYR 38.25
6 ELBOW, 90 DEGREE, SCH.5S, LR, SEAMLESS, BW, MATERIAL ASTM A403 GR.WP316/316L, ASME B16.9 WITH MTC	SGD 84.55	UAE Dirham 220.76	US $61.06	MYR 267.73
6 ELBOW, 45 DEGREE, SCH.5S, LR, BW, SEAMLESS, MATERIAL ASTM A403 GR.WP316/316L, ASME B16.9 WITH MTC	SGD 72.47	UAE Dirham 189.22	US $52.34	MYR 229.48
6, ELBOW 90-DEG LR, ASME B16.9, BE, SCH 40S, SS ASTM A403 GR WP304	SGD 107.57	UAE Dirham 280.87	US $77.69	MYR 340.63
24 SCH 20/STD 90 DEG PIPE FITTINGS - ELBOW CS A420 WPL6 WELD LR BW ASME B16.9	SGD 2.65	UAE Dirham 6.91	US $1.91	MYR 8.38
32 THK 27.75MM PIPE FITTINGS-90 DEG LR ELBOW ASTM A234 GR WP91 BEVELLED END ASME B16.9 SEAMLESS	SGD 7.79	UAE Dirham 20.35	US $5.63	MYR 24.68

ASME B16.9 Short Radius Elbow

ASME B16.9 LR Bw Elbow Schedule 80

ASME B16.9 Butt Weld 90 Degree Short Radius Elbow

18 in. Schedule 10 Carbon Steel Elbow 90 Degree

3/4 sch 40 BW Sch10 316L 180 Degree Compression Elbow

1 in. Buttweld Elbow 180 Deg

1/2 in. BW Sch40 ASME B16.9 Elbow

2-1/2 in. Elbow 45 Degree Schedule 10

Schedule 80 90 Deg Street Elbow

1-1/2 in. Stainless Steel 45 Degree Elbow

1 in. 150# Weld Polished 304L Long Radius Elbow Pipe Fittings

1-1/2 in. Cast Iron 90 Degree Elbow

LBS	Nominal Pipe Size	Kilogram
0.09	1/2	0.04
0.09	3/4	0.04
0.25	1	0.11
0.38	1.1/4	0.17
0.4	1.1/2	0.18
0.81	2	0.37
1.75	2.1/2	0.79
2.63	3	1.19
3.5	3.1/2	1.59
4.5	4	2.04
7.5	5	3.4
12	6	5.44
23	8	10.43
43	10	19.5
62	12	28.12
80	14	36.29
100	16	45.36
126	18	57.15
160	20	72.57
197	22	89.36
238	24	107.95
275	26	124.74
367	30	166.47
531	36	240.86
LBS	NPS	KG

OD, D	NPS	Center to End
		90 deg Elbows,  A	45 deg Elbows,  B
21.3	1/2	38	16
26.7	3/4	38	19
33.4	1	38	22
42.2	1 ¼	48	25
48.3	1 ½	57	29
60.3	2	76	35
73	2 ½	95	44
88.9	3	114	51
101.6	3 ½	133	57
114.3	4	152	64
141.3	5	190	79
168.3	6	229	95
219.1	8	305	127
273	10	381	159
323.8	12	457	190
355.6	14	533	222
406.4	16	610	254
457	18	686	286
508	20	762	318
559	22	838	343
610	24	914	381
660	26	991	406
711	28	1067	438
762	30	1143	470
813	32	1219	502
864	34	1295	533
914	36	1372	565
965	38	1448	600
1016	40	1524	632
1067	42	1600	660
1118	44	1676	695
1168	46	1753	727
1219	48	1829	759

O.D. D	NPS	ASME B16.9 45 deg 3D Center-to-End B	ASME B16.9 45 deg LR Center-to-End B	ASME B16.9 45 deg LR Center-to-End A	ASME B16.9 45 deg 3D Center-to-End A
21.3	1/2	–	16	38	–
26.7	3/4	24	19	38	57
33.4	1	31	22	38	76
42.2	1¼	39	25	48	95
48.3	1½	47	29	57	114
60.3	2	63	35	76	152
73	2½	79	44	95	190
88.9	3	95	51	114	229
101.6	3½	111	57	133	267
114.3	4	127	64	152	305
141.3	5	157	79	190	381
168.3	6	189	95	229	457
219.1	8	252	127	305	610
273	10	316	159	381	762
323.8	12	378	190	457	914
355.6	14	441	222	533	1067
406.4	16	505	254	610	1219
457	18	568	286	686	1372
508	20	632	318	762	1524
559	22	694	343	838	1676
610	24	757	381	914	1829
660	26	821	406	991	1981
711	28	883	438	1067	2134
762	30	964	470	1143	2286
813	32	1010	502	1219	2438
864	34	1073	533	1295	2591
914	36	1135	565	1372	2743
965	38	1200	600	1448	2896
1016	40	1264	632	1524	3048
1067	42	1326	660	1600	3200
1118	44	1389	695	1676	3353
1168	46	1453	727	1753	3505
1219	48	1516	759	1829	3658

Contact us if you want to buy Stainless steel 45 Degree Elbow and Brass 90 Deg Elbows at factory price

Stainless Steel 45 Degree Elbow manufacturer in India, we use European/ German & Korean raw material to produce Buttweld 180 Deg Elbow

ASME B16.9 Elbow Tolerances
For all fittings				Elbow 90 Deg / Elbow 45 Deg	180 Deg Returns Elbow
Inside Ø at End	Nominal Size (NPS)	Outside Ø at Bevel	Wall Thickness t / t1	Center to End Dim. A-B-C-M	Back to Face Dim. K	Center to Center Dim. O	Align- ment of Ends U
0,8	1/2 a 2 1/2	1	Not	2	7	7	1
1,6	3 a 3 1/2	1	less	2	7	7	1
1,6	4	+2 -1	than	2	7	7	1
1,6	5 a 6	+3 -1	87,50%	2	7	7	1
1,6	8	2	of nominal	2	7	7	1
3,2	10	+4 -3	tickness	2	7	7	2
3,2	12 a 18	+4 -3		3	7	10	2
4,8	20 a 24	+6 -5		3	7	10	2
4,8	26 a 30	+7 -5		3	…..	…..	…..
4,8	32 a 48	+7 -5		5	…..	…..	…..

OD, D	NPS	Center to End , A
33.4	1	25
42.2	1 ¼	32
48.3	1 ½	38
60.3	2	51
73	2 ½	64
88.9	3	76
101.6	3 ½	89
114.3	4	102
141.3	5	127
168.3	6	152
219.1	8	203
273	10	254
323.8	12	305
355.6	14	356
406.4	16	406
457	18	457
508	20	508
559	22	559
610	24	610

We are a specialist supplier & distributor of Carbon Steel Long Radius Elbow and 90 Degree Elbow Fitting

A	NPS	B	OD
57	3/4	24	26.7
76	1	31	33.4
95	1-1/4	39	42.2
114	1-1/2	47	48.3
152	2	63	60.3
190	2-1/2	79	73.0
229	3	95	88.9
267	3-1/2	111	101.6
305	4	127	114.3
381	5	157	141.3
457	6	189	168.3
610	8	252	219.1
762	10	316	273.0
914	12	378	323.8
1067	14	441	355.6
A	NPS	B	OD
1219	16	505	406.4
1372	18	568	457.0
1524	20	632	508.0
1676	22	694	559.0
1829	24	757	610.0
1981	26	821	660.0
2134	28	883	711.0
2286	30	964	762.0
2438	32	1010	813.0
2591	34	1073	864.0
2743	36	1135	914.0
2896	38	1200	965.0
3048	40	1264	1016.0
3200	42	1326	1067.0
3353	44	1389	1118.0
A	NPS	B	OD
3505	46	1453	1168.0
3658	48	1516	1219.0

Purchase Long/ Short Radius Elbow at discounted Price, We keep ready stock of ASTM A234 WPB 90/ 180 Degree Elbow in various types and sizes.

• Petrochemicals

• Heat Exchangers

• Gas Processing

• Off-Shore Oil Drilling Companies

• Sea Water Equipment

• Pharmaceutical Equipment

• Power Generation

• Chemical Equipment

• Condensers

• Specialty Chemicals

• Pulp and Paper Industry

• Pharmaceuticals

Why don't you directly contact a 2" 3/4" Inch 45 Degree Copper Elbow manufacturer in India? We offer an extensive range of 12 Inch Short Radius Elbow and Sch 40 Lr Elbow in Mumbai, free sample before dispatch of complete order.

ASME B16.9 Elbow Dimensions
inch	ND	mm	Radius	Center to center	Back to face	Center to end
D			A	O	K	B
1/2	15	21,34	38,10	76,20	47,62	15,87
3/4	20	26,67	28,57	57,15	42,86	11,11
1	25	33,40	38,10	76,20	55,56	22,22
1 1/4	32	42,16	47,60	95,25	69,85	25,40
1 1/2	40	48,26	57,15	114,30	82,55	28,57
2	50	60,32	76,20	152,40	106,40	34,92
2 1/2	65	73,02	95,25	190,50	131,80	44,45
3	80	88,90	114,30	228,60	158,75	50,80
3 1/2	90	101,60	133,35	266,70	184,15	57,15
4	100	114,30	152,40	304,80	209,55	63,50
5	125	141,30	190,50	381,00	261,90	79,38
6	150	168,27	228,60	457,20	312,70	95,25
8	200	219,07	304,80	609,60	414,30	127,00
10	250	273,05	381,00	762,00	517,50	158,75
12	300	323,85	457,20	914,40	619,10	190,50
14	350	355,60	533,40	1066,80	711,20	222,25
16	400	406,40	609,60	1219,20	812,80	254,00
18	450	457,20	685,80	1371,60	914,40	285,74
20	500	508,00	762,00	1524,00	1016,00	317,50
22	550	558,80	838,20	1676,40	1117,60	342,90
24	600	609,60	914,40	1828,80	1219,20	381,00
28	700	711,20	1066,80	2133,60	1422,40	441,90
Dimensions in mm.

Size Of Pipe			Thickness Of Wall	Radius	Approx. Weight (Kilogram)
DN		Outside Daimeter	t	A	e
inch	millimeter	millimeter	millimeter	millimeter	millimeter	45°	90°
Seamless
1¼	32	38	1.5	32.5	14	0.03	0.08
1	25	30	1.5	30	12	0.03	0.05
1½	40	44.5	1.5	40	17	0.06	0.14
2½	65	76	2	70	29	0.23	0.46
2	50	57	1.5	52.5	22	0.10	0.20
3	80	89	2	82.5	34	0.32	0.64
5	125	133	2.5	125	52	0.90	1.80
4	100	108	2.5	100	41	0.58	1.16
6	150	159	2.5	150	62	1.30	2.60
8	200	219	3	210	87	3.00	6.00
7	175	194	3	180	75	1.90	3.80
10	250	267	3	255	106	4.44	8.88
14	350	368	4	352.5	146	11.30	22.60
12	300	324	4	305	126	8.55	17.10
16	400	419	4	400	166	16.40	32.80
20	500	508	5	508	210	28.10	56.20
18	450	457	4.5	457	189	20.45	40.90
24	600	610	5	610	253	40.50	81.00
32	800	813	6	813	337	86.50	173.00
28	700	711	6	711	295	66.00	132.00
36	900	914	8	914	379	145.50	291.00

Top totch manufacturer of Aluminum 90 Degree Elbow in India, Distributor of 90 Degree Street Elbow

Why pay extra? Buying from Buttweld 45 Deg Elbow manufacturers saves your cost, wide selection of ASME B16.9 Long Radius Elbow and 90 Degree Elbow Fitting in India

O.D. D	NPS	180 Degree Elbow Long Radius		180 Degree Short Radius
		Center to Center O	Back to Face K	Back to Face K	Center to Center O
21.3	1/2	76	48	…	…
26.7	3/4	76	51	…	…
33.4	1	76	56	41	51
42.2	1.1/4	95	70	52	64
48.3	1.1/2	114	83	62	76
60.3	2	152	106	81	102
73	2.1/2	190	132	100	127
88.9	3	229	159	121	152
101.6	3.1/2	267	184	140	178
114.3	4	305	210	159	203
141.3	5	381	262	197	254
168.3	6	457	313	237	305
219.1	8	610	414	313	406
273	10	762	518	391	508
323.8	12	914	619	467	610
355.6	14	1067	711	533	711
406.4	16	1219	813	610	813
457	18	1372	914	686	914
508	20	1524	1016	762	1016
559	22	1676	1118	838	1118
610	24	1829	1219	914	1219

Abu Dhabi North West Development - Hail And Ghasha Sour Gas -Uae

Tatweer Petroleum Al Rumamin

Northern Mindoro Offshore Wind Power Project-Philippines

Optimal Chemicals Sdn-Malaysia

Rumaila Oil Field-UAE

Bateel International- UAE