An elbow is a pipe fitting that helps in changing the direction of media across two piping equipment. The 60 Degree Pipe Elbow is a device that is used to change the flow of gases or liquids by 60 degrees. These elbows ensure a smooth flow of pressurized media across harsh conditions. A 60 Degree Elbow Pipe Fitting can be produced in either equal or dissimilar sizes. The fittings may cause pressure loss or accelerate the flow of media if they are not regulated properly. The 60 Degree Metal Pipe Elbow is made up of short or long radius elbows that influence its direction of flow from the centreline. The long radius elbow is widely seen in the industry as it has a lower pressure drop than the latter.
A 60 Degree Stainless Steel Elbow is high-strength piping equipment that works well in high pressure and temperature conditions. These elbows work well in reducing corrosive affluents across stress-induced environments. The 60 Degree Carbon Steel Elbow is a high performance grade that is very reliable. These fittings have a higher content of carbon giving the elbows moderate strength and good tolerances. A 60 Degree Copper Elbow is a lightweight piece of equipment that is very economical in its operations. The copper elbows are easy to join and have superior strength and temperature resistance properties. The 60 Degree Black Pipe Elbow has a thin oxide on their surface that gives them good anti-corrosion properties and works well in different temperatures. The black elbows are utilized to transport oil and natural gas in harsh environments.
60 Degree Pipe Elbow
Carbon Steel 60 Degree Long Radius Elbow
Carbon Steel A234 WPB 60 Deg LR Elbow
LTCS WPL6 60° Long Radius Elbow
Carbon Steel A420 WPL6 60 Deg Long Radius Elbow
Carbon Steel 60 Degree Short Radius Elbow