Fittings are piping equipment that helps in influencing the characteristics of the flow in the system. A DIN 2605-1 Elbow is a pipe fitting that is used to efficiently change the direction of the flow in the system. These elbows can connect two pipes of equal or unequal sizes. The DIN 2605-1 Elbow Type 2 specifications cover pipe fittings having good tolerance and method for connection fitting using screwed or butt-weld specifications. DIN 2605 1 Type 3 Elbows can be produced in seamless and welded configurations. These elbows are available in sizes between ½ NB to 32 NB. The elbows are available in standard large and short radius configurations. A DIN 2605-1 Short Radius Elbow Type 2 has a radius of curvature which is equal to the nominal diameter of the pipe. These types of elbows are normally seen in low-speed and pressure pipelines in tight areas.
These elbows are generally designed in 45 and 90 degree specifications. A DIN 2605-1 Type 2 90 Degree Elbow is a common fitting that allows to change the direction of the flow of fluids and gases at an angle of 90 degrees. Similarly, a DIN 2605-1 45 Deg Elbow allows for a change in the direction of the flow by 45 degrees. These elbows allow for a smoother change in direction compared to 90 degree elbows. The DIN 2605 Stainless Steel Elbow is a versatile grade of elbows that showcases outstanding corrosion resistance properties. These elbows are very reliable and can work well in different pressure and temperature setups.
DIN 2605 45 Elbow
Elbow 90 DIN 2605
DIN 2605 180 Elbow
Long Radius DIN 2605 Elbow type 3
Short Radius DIN 2605 45 Elbow
DIN 2605-1 Elbow
DIN 2605 45 Deg Elbow Type 3
DIN 2605 90 Deg Elbow Type 2
DIN 2605 Elbow