An olet is a fitting that is designed via a forging process allowing it to connect 45 and 90 degrees equipment to reinforce it with the branch connection. A Sockolet Fitting is used to reinforce the branch accessory that is connected to the main run pipe. These fittings are well-suited to meet the demands of small piping instruments. The ASME B16.11 Sockolet is part of the socket-weld family that can be availed in full or reduced sizes. The items are available in pressure classes of 3000, 6000, and 9000. An NptSockolet is welded using a single fillet weld and is seen in lower pressure conditions. An nptsockolet has peaks and angles at a 60-degree thread angle. The Forged Steel Sockolet is an iron and carbon alloy that is produced at extreme pressures. They possess a lower surface porosity and have a finer grain structure. They have good strength and showcase greater ductility compared to processed steel.
A Stainless Steel Sockolet exhibits outstanding resistance to corrosive media. The sockolet has good ease of fabrication and possesses an aesthetical outlook that makes it very desirable in the industry. The Carbon Steel Sockolet, as the name suggests, has a higher content of carbon, allowing them to possess enhanced strength. The sockolets in this grade are available at low prices and are very durable in their functionality. An Mss Sp-97 Sockolet is designed in dimensions up to 48 inches to the run pipe with 2 inches to a branch pipe. They possess rounded edges on both ends. The Cl3000 Sockolet are quality-certified as they are subjected to vigorous
Hastelloy C22 Sockolet
Stainless steel Socket Weld Outlets
Din Pn10 Sockolet
Alloy Steel Blind Sockolet
Nickel Alloy 200 Sockolet
Copper Nickel Sockolet
Stainless Steel Sockolet
Raised Faced Sockolet
Alloy 20 Sockolet
Alloy Steel Welding Outlets
Duplex Steel Sockolet
ASTM A182 SS Sockolet
Inconel 600 Sockolet
ASME B16.11 Sockolet
Carbon Steel Sockolet
ANSI B16.11 Sockolet
Mss Sp-97 Sockolet
Socket Weld Outlets