ASME B16.47 Flange and ANSI B16.47 Series A/ B Flanges Dimensions

Leading Supplier of ANSI B16.47 Series A Flanges in Mumbai, Check Price list of ASME B16.47 Series B Class 150 Flange

Refer Pressure Rating and Dimensions of ASME B16.47 slip on flange

What is ASME B16.47 Flange?
The ASME B16.47 flange is a device used to connect different piping equipment to create an efficient pipeline system. These flanges are designed in sizes between 26 inches to 40 inches and are pressure rated between 75 to 900 classes. They allow for an easy installation process, allowing room for maintenance and repair. The flanges of the ASME B16.47 flange are characterized into class A and B flanges that are available in blind, slip on, weld neck, orifice, and other flange types.

ASME B16.47 Series A vs Series B

The ASME B16.47 Series A flange is heavier and stronger compared to the ASME B16.47 Series B flanges.
The ASME B16.47 Series B flange is comparatively cheaper than series A flanges.
The series B flange has less movement after installation compared to the latter.
The series A flanges are used for connecting new pipeline equipment. The series B flanges are common for replacement and refurbishment applications.

Buy ANSI B16.47 Series B Class 600 Flange at competitive rate directly from stockist

ANSI B16.47 Series B Class 300 Flange vs Class 900
The ANSI B16.47 Series B Class 300 Flange and Class 900 are two pressure ratings of a flange that can be characterized by unique features.

ANSI B16.47 Series B Class 900 is designed to operate at elevated pressure and temperature setups compared to class 300 flanges.
The class 900 flanges are produced with a higher steel content compared to class 300 flanges.

Heat treatment of ASME B16.47 slip on flange
Heat treatment is necessary for ASME B16.47 slip on flange to enhance the performance of the grade. In the heat treatment process, the flange can be annealed, normalized, and subsequently quenched giving it additional strength or better performance. The heating temperature and cooling speed have to be carefully kept under control to get the desired finish for your flange.