EN 1092-2 Flange and En 1092-2 Pn16/ PN10 Flanges Dimensions

Refer En 1092-2 Pn16 Flange Dimensions, Check Price list of Bs En 1092-2 Flange

Best Quality EN 1092-2 Slip-On Flange Stockholder, Ready to dispatch stock of En 1092-2 Type B Raised Face Flange

A flange is a lip or a ridge that serves in increasing strength of a pipe, while ensuring an easy attachment with piping equipment. The En 1092-2 Flange is manufactured to meet different service requirements in the oil and gas industry. These flanges are easy to install and allow plenty of room for maintenance and repair. A BsEn 1092-2 Flange has good corrosion resistance properties and aids in the transference of stress to reduce the torsion of the system. These flanges are suited for high-pressure conditions. The Din En 1092-2 Flanges are available in class 150 to class 2500 LBS. These flanges are coated with anti-rust, galvanized, or other paint to give them added tolerance in the system. An En 1092-2 Flange Dimensions are available in 15 NB to 1200 NB. These flanges are designed for flat faces, raised faces, and ring-type joint facing. The En 1092-2 Flange Standard is produced following all international and national standards. These standards allow them to be shaped in the form of slip on, blind, socket-weld, threaded, weld neck, and other types of flanges.

Get in touch for assistance for buying Blind Flange EN 1092-2 Type 05, Check latest price list of EN 1092-2 Pipe Flanges

The En 1092-2 Pn16 Flange are pressurized grades that are designed to operate at pressures up to 16 bar. These flanges are well-suited for moderate pressures and temperatures. An En 1092-2 Pn25 Flange has slightly higher strength, allowing it to work in pressures up to 25 bar. These flanges allow room for easy attachment to different places. The En 1092-2 Pn 40 Flange works at extreme pressures, allowing it to work at pressures up to 40 bar.