Connections made with pipe help in creating a crucial channel for transporting steam and fluid across different industries and refineries. The P235GH Flange is a European specified steel that is used in pressure vessels like boilers, heat exchangers, etc. These flanges are designed to work in elevated working temperatures and have good resistance to corrosive media. P245GH Forged Flanges are carbon alloys that have excellent chemical composition. These flanges have a lower surface porosity and possess a finer grain structure. They are easy to install and can be easily cleaned due to their good design geometry. The P250GH Forging is a heat-resistant steel material that is suitable to work in temperatures up to 480 degrees C. The material has a yield strength of 250mpa and possesses a tensile strength between 410 to 540mpa and can be elongated by 25% in the system.
A P305GH Steel Blind Flange doesn’t have a bore at the center and is used to terminate the flow of media in hydraulic systems. These flanges can be used alongside another flange to isolate the pipe. The En1092-1 P280GH Slip On Flange is connected to the mainline with two fillet welds. They can fit a range of equipment of different sizes and help in creating leak-proof sealing. These flanges are preferred for low-pressure and temperature applications. A P250GH Carbon Steel Socket Weld Flange has the same static strength as slip-on flanges. These flanges are recommended for joining pipes of smaller diameters using a single fillet weld. They are seen in applications where stress on the system is low. The P245GH Steel Threaded Flange is a screwed flange that has threads on its flange bore that fit with a matching thread on the pipe. P245GH Steel Orifice Flanges are disc-shaped grades that are used to measure the flow rate in either liquid or gaseous media.
P235gh Carbon Steel Plate Flange
Werkstoff P235gh Spectacle Blind Flanges
En 10216-2 P235gh Tc1 Blind Flange
CS P235GH Socket Weld Flange
P235gh Carbon Steel Welding Neck Flange
Steel P235gh Tc1 Raised Face Flanges
En 10216-2 P235gh Lap Joint Flange
En 1092-2 Steel P235gh Weld Neck Flange
Carbon Steel Grade P235gh Tc1 Reducing Flanges
Carbon Steel P235GH Threaded Flange
Pressure Vessel P235GH Slip On Flange