Stainless Steel 310 Flanges

A stainless steel 310 flanges is a protruded lip or rim that helps increase the strength and allows for easy attachment with other piping equipment. The SS 310 flanges are austenitic medium carbon grade that has a good chemical content of chromium and nickel. These flanges can be easily installed and subsequently disassembled. The 310 stainless steel flanges work well across high temperatures up to 1150 degrees C. These flanges have enhanced resistance to corrosive media and are widely utilized in moderate carburizing environments, which are common in the oil and gas industry.

ASTM A182 F310S Socket Weld Flange Manufacturer in India

The AISI 310S slip on flange works well in low pressure and temperature processes. These flanges are easy to install as they are slid on the pipe and welded on its interior and exterior. Their lower costs make them a favored flange in the oil and gas industry. Werkstoff No 1.4845 weld neck flanges are produced with a protruded hub or lip that helps reduce the stress on subsequent pipes. The weld neck flanges work well across high-temperature and pressure conditions, making it well suited for applications where repeating bending is taking place in the system. The ASTM A182 F310 blind flange doesn’t possess a bore at its center whose main function is to act as a blank. The blank helps cut the flow for permanent stoppage or repair. The SS 310 Socket Weld Flanges possess similar strength as slip on flanges. These flanges are used to fit pipes of smaller sizes with NPS 2 or smaller. Socket weld flanges are used in low pressure and temperature setups where stress on the system is low. A UNS S31000 threaded flange is a screwed flange that has threads that allow them to easily attach to threads on other equipment. The threaded flange can be easily attached without needing any welding process.

SS 310S Blind Flanges Supplier for Oil and Gas Pipeline, Refer Specification as per ASME B16.5

ASTM A182 F310H stainless steel flanges is a high carbon version of the SS 310 alloy, designed for high temperature applications.

• Oxidation Resistance

• Resistance to Sulfidation

• Resistance to Carbide Precipitation

• Resistance to Acidic Environments

Most Selling Size :

• NPS: ½" to 24"
• PN2.5 To PN400
• DN15 To DN1500
• Contact SS 310 flanges manufacturer in India for above 48 Inch

Types Of Pressure :

• 150 LB & 300 LB
• 600 LB & 900 LB
• 1500 LB & 2500 LB

International Standard :

• ASME B16.36
• ASME B16.47
• ASME B16.5
• ASME B16.48

Maximum Size :

• 26" To 60"

Process :

• Plate
• Forged
• Cast

Bolts Hole No. :

• 4 To 48

Surface Finish :

• Cold Water Finish
• Concentric Serrated
• Mirror Finish
• Spiral Serrated
• Stock & Smooth

Face Types :

• Male & Female
• RTJ Face
• RF Face
• Tongue & Groove
• FF Face

Types of Threads :

• MPT
• MNPT
• NPT
• BSP
• FPT
• BSPT

Common Thickness :

• SCH 120/ 140/ 180
• SCH 10/ 20/ 40
• SCH 60/ 80/ 100

Use For :

• Power Generation
• Nuclear Energy
• Oil & gas plants
• Petrochemicals

Testing Checklist :

• PMI test
• Hardness test
• Tensile test
• Material inspection
• Impact test

Advantages :

• Good Weldability
• Good Formability

Connection :

• Welding
• Threaded

Marking Method :

• Standard & Heat No.
• Manufacturers Name
• Grade & Material
• Size & Schedule

Life :

• Stainless Steel = 50 To 55

Value Added Services :

• Polishing
• Threading
• Minor Fabrication
• Beveling end
• Casting

Logistics :

• By Air
• By Sea
• Philippines = 14 day
• Indonesia = 9 day
• Oman = 5 day
• Bahrain = 9 days
• Kuwait = 10 day
• Singapore = 8 days
• Singapore = 30-45 days

Documentation List :

• Material traceability records
• Raw material test reports
• Fumigation certificates

Applicable Fluids :

• Oil and Gas
• Water & Air
• Steam

Forging Temperature :

• 1700°F to 2300°F

Check Benefits of Using UNS S31000 Slip On Flanges, Check Melting Point & Density

• Exceptional High-Temperature Resistance

• Superior Corrosion Resistance

• High Strength and Durability

• Excellent Weldability

• Non-Magnetic Properties

• Easy to Clean

• Exceptional Corrosion Resistance

• 7.9 g/cm3

310S Stainless Steel Flanges Tensile Strength and Yield Strength

• 75000 PSI

• 515 MPa

• 30000 PSI

• 205 MPa

Check ASTM A182 F310 Stainless Steel Flanges Carbon, Manganese, Silicon, and Phosphorus Content

310 SS Slip On Flanges

310 Stainless Steel Reducing Flanges

SA 182 Gr F310 Threaded Flanges

ASTM A182 F310 Orifice Flanges

SS 310 Plate Flanges

Stainless Steel 310 Weld Neck Flanges

A182 Grade F310 Blind Flanges

AISI 310 Lap Joint Flanges

ASME SA182 F310 Spectacle Blind Flanges

A182 Grade F310 Puddle Flanges

UNS S31000 Long Weld Neck Flanges

WNR 1.4841 Socket Weld Flanges